MAINTENANCE
Maintenance schedule
The following is a list of maintenance procedures that must be performed on the machine. For
those points not described in this manual, visit an authorized service workshop.
Daily
Maintenance interval months/hours
maint.
MaintenancePage
before
1/253/506/10012/300
starting
Check the engine oil level34
1)
Replace engine oil 34
Check the air filter25
2)
Clean the air filter 25
2)
Replace air filter cartridge 25
Clean sludge reservoir for fuel system26
Check and clean the spark plug27
Replace the spark plug27
Check idle speed26
4)
Check and adjust play in valves -
4)
Clean fuel tank -
4, 5)
Check, replace fuel lines as necessary -
Check clutch and clutch cable-
Check flail blade lock washers-
Check decals and warning signs-
Check the seed holes for the seeder-
Check wear and tension on the belts28
Check blade wear and condition29
Check the chassis, bolts and set screws-
Check the seed control lever for the seeder-
Check the wire mountings on the seeder-
Lubrication; see the Lubrication schedule
1) 2) 3)
First change after 20 hours.In dusty conditions maintenance is required at shorter intervals. With daily use, the machine shall be
lubricated twice weekly. 4) Performed by authorized service workshop. 5) Performed every second year.
= Described in this manual.
M = Not described in this manual.
WARNING!
No service operations may be performed on the engine or unit unless:
The engine is stopped.
The ignition cable has been removed from the spark plug.
The machine is securely parked where it will not tip or begin rolling.
25 |
ACEC
HUSQVARNA
