CAUTION:< If you listen to multi-channel DVD-Audio through one of the
< Switch off the power to all equipment before makingdigital outputs, it will be downmixed to stereo. Also, high
connections.sampling rate DVD-Audio (192kHz or 176.4kHz) will be
< Read the instructions of each component you intend to usedownsampled to 96kHz, 88.2kHz, 48kHz or 44.1kHz,
with this unit.depending on the disc. Multi channel and high sampling rate
< Be sure to insert each plug securely. To prevent hum andDVD-Audio is only available through the analog outputs.
noise, avoid bundling the signal interconnection cablesSome DVD-Audio and all Super Audio CD audio is output
together with the AC power cord or speaker cables.only through the analog outputs.
If you want to enjoy multi-channel sound of DVD-Audio and
Super Audio CD, use the 5.1CH AUDIO OUT terminals.
A 2 channel high quality AUDIO OUT terminal
This terminal outputs 2 channel analog audio. The sound
< Note that if OAudio out� is set to O5.1 channel�, only the
output from this terminal is superior in quality.
front L/R sound of the multi-channel material will be output
from the 2CH AUDIO OUT terminals (A and D ).
Use commercially available RCA cables to connect the RCA
Therefore it is possible to connect the 2 channel high quality
outputs of the DV-30s to the appropriate inputs of the
AUDIO OUT terminal to your surround amplifier together with
amplifier.
the CENTER, SURROUND and SUBWOOFER terminals.
B DIGITAL OUT terminals
Connect one of the digital output terminals to the
appropriate digital input terminal of a digital device such as
a decoder, CD recorder, MD deck, etc.
Use a commercially-available RCA coaxial cable or optical
digital cable.RLFrontRLSurroundCenterSubwoofer
5.1 CH AUDIO IN
When inserting the plug of the optical cable, the protective
shutter of the terminal will open and you should hear it click
Surround Amplifier
into position when fully inserted. Be careful that you do not
force the plug, because this could result in damage to the
protective shutter, the cable, or the unit itself.
< Select the proper digital output setting in accordance with
your connection.
C 5.1CH AUDIO OUT terminals
5.1 channel analog audio is output from these terminals.
If your amplifier has 5.1 channel analog inputs, connect
them with commercially-available RCA cables.
< Select O5.1� in the setup menu.(See page 15, 37)
D 2CH AUDIO OUT terminals
2 channel analog audio is output from these terminals.
9 |
ACEC
TEAC
