Recording from External Equipment
Notice about Connection
Recording from a Digital
Y To connect the Recorder with a digital camcorder, set
Camcorder Using i.LINKdigital camcorder POWER to OPLAY (Video side)�, and
connect while in the stopped state. If the DV is connected
(DV-HR480H only)
when POWER is set to ORECORD (Camera side)�, or
HDD DVD-RW DVD-RW DVD-Rwhen tape has been played back, the DV LINK will not
VR MODEVIDEO MODEwork correctly.
Y There are some digital camcorders which cannot be
About DV Inputoperated using the On-Screen Control Panel of this
Recorder, even if you set ODV LINK SETTING� under ODV
Y When this Recorder is connected with a DV-format digital
camcorder using a DV cable, you can record and editSETTING� to OYES�. In cases like this, set ODV LINK
SETTING� to ONO�. (page 113)
with minimal deterioration of picture and sound quality
Y Signals from the camcorder may not be input to this
using a digital signal. (DV LINK)
Recorder depending on the model of the camcorder.
Y You can also display an operation panel for digital
When this happens, use an analogue connection (page
camcorder control on the screen, and operate using the113).
buttons on the panel. This allows easy recording onto
Y The DV IN terminal cannot be used for connection to a
disc. Record after first performing ODV SETTING� (page
PC.
101, 113).
Y This Recorder cannot be controlled by a digital
Y The DV IN terminal of this Recorder only enables input of
DV-format camcorders (DVC-SD signals). It is notcamcorder connected to the DV IN terminal.
Y Only one camcorder can be connected to this Recorder
compatible with satellite receivers or Digital VHS video
using the DV IN terminal.
recorders since they employ a different format.
Y Connect this Recorder and the camcorder directly. The
* i.LINK is a function that lets you control other equipment
DV signal will not be input if the camcorder is connected
by input and output of video, audio, data and control
to this Recorder through other equipment with a DV IN
signals between equipment having an i.LINK terminal.terminal.
* i.LINK refers to the IEEE1394-1995 industry specification
and extensions thereof. The logo is used for products
compliant with the i.LINK standard.Connecting a Digital
* i.LINK is a trademark.Camcorder Using the DV IN
Terminal (i.LINK)
Input of Video, Audio and Data
Refer to the userOs manual provided with the camcorder for
Signalsinformation on the procedure for connecting the camcorder
with this Recorder.
Y Date and time data as well as the contents of cassette
memory cannot be recorded with this Recorder.
The Recorder
Y Video and audio signals of protected material or OCopy
Once� material cannot be recorded.
Audio Type Input From Digital
Camcorder
Digital camcorders typically have the following two audioTo DV IN terminal
modes.Digital camcorder
16-bit (48 kHz)To DV terminal
DV cable
Although this yields high sound quality, only one stereo
(commercially available)
audio signal can be processed.
12-bit (32 kHz)
Two stereo signals can be processed. In general,Before connecting, set the power
switch of the digital camcorder to
overdubbed audio is recorded in Stereo 2.OVideo (Playback)� and stop the
Y This Recorder allows listening or recording of eithercamcorder.
Stereo 1 or Stereo 2 audio if the input audio is in the 12-bit
audio mode.
Y This Recorder is unable to process 44.1 kHz input audio
signals.
100
HR480H-098-1031002005.4.5, 2:37 PM |
ACEC
SHARP
