Other (Troubleshooting)
Troubleshooting
Incorrect operations can be mistaken as malfunctions. If you believe the unit is not operating correctly, consult the chart below. Sometimes incorrect
operation may be due to a malfunction in another component. If the problem is not fixed, check the other components used with the player. If the
problem still persists, contact your nearest Pioneer authorized service center or dealer for service.
SymptomProbable DiagnosisRemedy
No power.? Power cord isnOt connected.? Connect power cord properly.
Discs donOt eject when the EJECT? The eject/stop mode select switch is set to? Set the player to pause mode or cue standby
(0) button is pressed.LOCK.mode then press EJECT (0) button.
? Set the eject/stop mode selector switch to
UNLOCK then press EJECT (0) button.
Playback doesnOt start when a disc? Auto cue function is set to ON.? Hold the TIME MODE/AUTO CUE button
is inserted.depressed for 1 second or more to turn the
Playback stops immediately afterauto cue function off.
starting.? Disc is loaded with label side down.? Reload the disc with label side up.
? Disc is fogged or dirty.? Clean the disc.
? The disc has a different region number.? Check the disc for correct region number If it
is not correct, it cannot be played on this unit.
DVD-R, DVD-RW discs cannot be? Disc isnOt recorded in video format.? Record disc in video format.
played.
ONOT VIDEO FORMAT� is
displayed.
CanOt play DVD.? Mode select switch is set to ODJ�. Some DVDs? Set mode select switch to ONORMAL�.
are constructed to prohibit playing in DJ mode.
The marks appear.? Operation is prohibited by disc or player.? Perform correct operation.
Images donOt appear on screen.? Output cables are loose or not connected? Connect correctly.
correctly.
? Improper operation of television or video mixer,? Confirm settings of television or video mixer,
etc.etc.
? Television connected to component video output? Set component video output connector setting
connector does not support progressive scan.to [Interlace].
No sound.? Output cables are loose or not connected correctly.? Connect cables correctly.
? Improper operation of audio mixer.? Check audio mixerOs switches and volume
settings.
? Connectors or plugs are dirty.? Clean connectors and plugs.
? Player is set to pause mode.? Press PLAY/PAUSE (6) button to begin
playback.
Sound is distorted or has noise.? Output cables are not connected correctly.? Connect cables correctly to audio mixer line
input connectors. Do not connect to MIC
connector.
? Connectors or plugs are dirty.? Clean connectors and plugs.
? Electromagnetic influence from television.? Turn off television or move farther away.
Certain discs produce much noise.? Disc has large scratches.? Replace disc.
Playback is interrupted.? Disc is very dirty.? Clean disc.
DVDs and CDs produce different? Due to difference in recording formats.? Not a malfunction.
sound volumes.
When auto cue function is ON, track? If intervals between tracks is very long, track? Hold the TIME MODE/AUTO CUE button
search does not end.search takes longer.depressed for 1 second or more to turn auto
? If a non-recorded intervals continue for more thancue function OFF.
10 seconds, play will not begin unless auto cue
function is turned OFF.
During playback, back cue doesnOt? No cue point is set.? Set a cue point. ( P.34)
occur when CUE button is pressed.? Mode select switch is set to ONORMAL�.? Set mode select switch to ODJ�.
? With DVD, some discs do not support DJ? Play back a part supporting DJ operations.
operations during playback.
Loop play doesnOt start when LOOP? Cue point (loop-in point) isnOt set.? Set a cue point. ( P.34)
OUT/OUT ADJUST button is? Mode select switch is set to ONORMAL�.? Set mode select switch to ODJ�.
pressed.? Cue points and angle, audio settings are different.? Set angle and audio conditions the same.
? With DVD, some discs do not support point DJ? Play a part supporting DJ operations.
operations during playback.
Auto cue setting is not retained.? The power was turned off right after settings? Wait 10 seconds before turning off the unit
All settings cannot be returned towere made or changed.after changing settings.
their factory defaults.
44
En <DRB1359> |