DVP-NS71HP/NS75H/NS76H
APAUSE MODE (DVD VIDEO/DVD-VR ADivX
Custom Settings (CUSTOM mode only)Displays the registration code for this player. Settings for the Sound
Selects the picture in pause mode.For more information, go to
SETUP)http://www.divx.com(AUDIO SETUP)
AUTOThe picture, including subjects on the Internet.
that move dynamically, is
Use this to set up playback related and other output with no jitter. Normally AAUDIO (HDMI)?AUDIO SETUP? allows you to set the sound
settings.select this position.Selects the type of audio signal output from according to the playback and connection
FRAMEThe picture, including subjects the HDMI OUT jack.conditions.
Select ?CUSTOM SETUP? in the Setup that do not move dynamically,
Display. To use the display, see ?Using the is output in high resolution.AUTONormally, select this. Outputs Select ?AUDIO SETUP? in the Setup
Setup Display? (page 64).audio signals according to the Display. To use the display, see ?Using the
The default settings are underlined.?DIGITAL OUT? settings Setup Display? (page 64).
ATRACK SELECTION (DVD VIDEO only)(page 70).The default settings are underlined.
CUSTOM SETUPGives the sound track which contains the PCMConverts Dolby Digital, or 96
AUTO POWER OFF:ON
AUTO PLAY:OFFhighest number of channels priority when you kHz/24 bit PCM signals to 48 AUDIO SETUPAUDIO ATT:OFF
DIMMER:BRIGHTplay a DVD VIDEO on which multiple audio kHz/16 bit PCM.AUDIO DRC:STANDARD
PAUSE MODE:AUTOformats (PCM, MPEG audio, DTS, or Dolby AUDIO FILTER:SHARP
TRACK SELECTION:OFFDOWNMIX:DOLBY SURROUND
MULTI-DISC RESUME:ONDigital format) are recorded.DIGITAL OUT:ON
DivX:Registration CodeNote
AUDIO (HDMI):AUTODOLBY DIGITAL:MPEG:D-PCMPCM
OFFNo priority given.A loud noise (or no sound) will be output if you DTS:OFF
AUTOPriority given.connect the player to a TV that is not compatible 48kHz/96kHz PCM:48kHz/16bit
with DOLBY DIGITAL/DTS signals and ?AUTO?
AAUTO POWER OFFis selected. In this case, select ?PCM.?
Switches the Auto Power Off setting on or AAUDIO ATT (attenuation)
off.NotesIf the playback sound is distorted, set this
When you set the item to ?AUTO,? the language item to ?ON.? The player reduces the audio
ONThe player enters standby mode may change. The ?TRACK SELECTION? setting output level.
when left in stop mode for more has higher priority than the ?AUDIO? settings in This function affects the output of the
than 30 minutes.?LANGUAGE SETUP? (page 65).following jacks:
OFFSwitches this function off. If PCM, DTS, MPEG audio, and Dolby Digital -LINE OUT L/R (AUDIO) jacks
sound tracks have the same number of channels, -LINE (RGB)-TV jack
the player selects PCM, DTS, MPEG, and Dolby
AAUTO PLAYDigital audio sound tracks in this order.OFFNormally, select this position.
Switches the Auto Play setting on or off. This Settings and AdjustmentsONSelect this when the playback sound
function is useful when the player is AMULTI-DISC RESUME (DVD VIDEO/from the speakers is distorted.
connected to a timer (not supplied).VIDEO CD only)
Switches the Multi-disc Resume setting on or
OFFSwitches this function off.off. Resume playback can be stored in AAUDIO DRC (Dynamic Range Control)
ONAutomatically starts playback memory for up to 6 different DVD VIDEOs/(DVD VIDEO/DVD-VR mode only)
when the player is turned on by VIDEO CDs (page 26).Makes the sound clear when the volume is
a timer (not supplied).turned down when playing a DVD that
ONStores the resume setting in
memory for up to 6 discs.conforms to ?AUDIO DRC.?
ADIMMEROFFDoes not store the resume This function affects the output from the
Adjusts the lighting of the front panel display.setting in memory. Playback following jacks:-LINE OUT L/R (AUDIO) jacks
BRIGHTMakes the lighting bright.restarts at the resume point only -LINE (RGB)-TV jack
for the current disc in the player.
DARKMakes the lighting dark.-DIGITAL OUT (OPTICAL or COAXIAL)/
HDMI OUT jack only when ?DOLBY
AUTO Makes the lighting dark if you NoteDIGITAL? is set to ?D-PCM? (page 70).
DARKdo not operate the player or
If you run Quick Setup, Multi-disc Resume settings
remote for a short while.stored in memory may return to the default settings.STANDARD Normally select this position.
TV MODEMakes low sounds clear even if
you turn the volume down.
WIDEGives you the feeling of being
RANGEat a live performance.
68,continued69
AAUDIO FILTERAMPEG (DVD VIDEO/DVD-VR mode only)
Selects the digital filter to reduce noise above Setting the digital output signalSelects the type of MPEG audio signal.Notes
22.05kHz (Sampling frequency (Fs) of the Switches the method of outputting audio The analogue audio signals from the LINE OUT
audio source is 44.1kHz), 24 kHz (Fs is PCMSelect this when the player is L/R (AUDIO) jacks are not affected by this
signals when you connect a component such
48kHz), or 48kHz (Fs is above 96kHz).connected to an audio setting and keep their original sampling frequency
as an amplifier (receiver) or MD deck with a component without a built-in level.
SHARPProvides a wide frequency range digital input jack.MPEG decoder. If you play If the HDMI OUT jack is connected to equipment
and spatial feeling.For connection details, see page 20.multi-channel MPEG audio not compatible with 96 kHz/24 bit signals,
sound tracks, only the Front (L) 48 kHz/16 bit PCM will be automatically output
SLOWProvides smooth and warm Select ?DOLBY DIGITAL,? ?MPEG,? and Front (R) signals will be even when you select ?96kHz/24bit.?
sound.?DTS,? and ?48kHz/96kHz PCM? after output from your two front
setting ?DIGITAL OUT? to ?ON.?speakers.
If you connect a component that is
Noteincompatible with the selected audio signal, a MPEGSelect this when the player is connected to an audio
There may be little effect by changing the digital loud noise (or no sound) may be heard from component with a built-in
filter depending on the disc or playback MPEG decoder.
environment.the speakers, risking damage to your ears or
speakers.
ADOWNMIX (DVD VIDEO/DVD-VR mode
only)NotesNote
Switches the method for mixing down to 2 The AV SYNC function (page49) is not effective If the HDMI OUT jack is connected to equipment
channels when you play a DVD which has if you use the DIGITAL OUT (OPTICAL or not compatible with MPEG audio signal, the
rear sound elements (channels) or is recorded COAXIAL) jack, and set ?DOLBY DIGITAL,? ?PCM? signals will be automatically output even
in Dolby Digital format. For details on the ?MPEG? or ?DTS? to ?DOLBY DIGITAL,? when you select ?MPEG.?
rear signal components, see ?Checking the ?MPEG? or ?ON? respectively.ADTS
audio signal format? (page 41). This function The AV SYNC function (page49) is not effective
Selects the type of DTS audio signals.
affects the output of the following jacks:if you connect a Dolby Digital or DTS-compliant
-LINE OUT L/R (AUDIO) jacksdevice via the HDMI OUT jack, and set ?DOLBY OFFSelect this when the player is
-LINE (RGB)-TV jackDIGITAL,? ?MPEG? or ?DTS? to ?DOLBY connected to an audio
-DIGITAL OUT (OPTICAL or COAXIAL)/DIGITAL,? ?MPEG? or ?ON? respectively.component without a built-in
HDMI OUT jack when ?DOLBY DTS decoder.
DIGITAL? is set to ?D-PCM? (page 70).ADOLBY DIGITAL (DVD VIDEO/DVD-VR ONSelect this when the player is
mode only)
DOLBYNormally, select this position. Selects the type of Dolby Digital signal.connected to an audio component with a built-in DTS
SUR-Multi-channel audio signals are
ROUNDoutput to 2 channels for enjoying D-PCMSelect this when the player is decoder.Settings and Adjustments
surround sounds.connected to an audio
component without a built-in
NORMAL Multi-channel audio signals are Dolby Digital decoder. You can Note
downmixed to 2 channels for use If the HDMI OUT jack is connected to equipment
with your stereo.select whether the signals not compatible with DTS signals, the ?OFF? signals
conform to Dolby Surround will be automatically output even when you select
ADIGITAL OUT(Pro Logic) or not by making ?ON.?
Selects if audio signals are output via the adjustments to the
?DOWNMIX? item in A48kHz/96kHz PCM (DVD VIDEO only)
DIGITAL OUT (OPTICAL or COAXIAL)/
?AUDIO SETUP? (page 69).
HDMI OUT jack.Selects the sampling frequency of the audio
DOLBYSelect this when the player is signal.
ONNormally select this position. When DIGITALconnected to an audio
you select ?ON,? see ?Setting the component with a built-in 48kHz/16bit The audio signals of DVD
digital output signal? for further Dolby Digital decoder.VIDEOs are always converted
settings.to 48kHz/16bit.
OFF The influence of the digital circuit 96kHz/24bit All types of signals including
upon the analog circuit is minimal. If Note96kHz/24bit are output in their
you are using the HDMI OUT jack, If the HDMI OUT jack is connected to equipment original format. However, if the
PCM sound will be output depending not compatible with DOLBY DIGITAL signals, the signal is encrypted for
on the connected equipment. If the ?D-PCM? signals will be automatically output even copyright protection purposes,
signal is encrypted for copyright when you select ?DOLBY DIGITAL.?the signal is only output as 48kHz/16bit.
protection purposes, the signal is only
output as 48 kHz/16 bit PCM.
7071
1-17 |
ACEC
SONY
