Error Codes List6-4. DRIVE AUTO ADJUSTMENT
00: Error not detectedOn the Test Mode Menu screen, press [1] key on the remote com-
01: RAM write/read data discordmander, and the drive auto adjustment menu will be displayed.
03: EEPROM NG
04: Flash memory clear error## Drive Auto Adjustment ##
05: Flash memory write error
06: Flash memory read data discordAdjustment Menu
08: ARP register read data discord
09: ARP Tt RAM data bus error0. ALL
10: ARP Tt RAM address bus error1. DVD-SL
11: ARP RAM read data discord2. CD
12: Servo DSP NG3. DVD-DL
4. LCD
13: RF Amp NG
14: 1935 SDRAM NG
15: ARP t1935 video NGExit: RETURN
16: ARP t1935 audio NG
1A: System call error (Function not supported)
1B: System call error (Parameter error)
Normally, [0] is selected to adjust DVD (single layer), CD, and
1C: System call error (Illegal ID number)
20: System call error (Time out)DVD (dual layer) in this order. But, individual items can be ad-
justed for the case where adjustment is suspended due to an error.
22: Resistor installation error
52: Video Encoder W/R NGIn this mode, the adjustment can be made easily through the op-
55: External RAM W/R NGeration following the message displayed on the screen. Which disc
is currently adjusted is displayed on the fluorescent display tube.
90: Error occurred
91: User verification NG
92: Diagnosis cancelled0. ALL
You will be asked if EEPROM data are initialized or not, and for
this prompt, select [0] and press the [ENTER] key. First, the servo
setting data in EEPROM, Emergency History and Hour Meter are
cleared to initialize. Then, [1] DVD-SL disc, [2] CD disc, and [3]
DVD-DL disc are adjusted in this order. Because the changer model
can accept multiple discs in advance of adjustment, adjustments
can be continued by exchanging discs automatically whenever an
adjustment is completed following the instruction on screen. You
can exit the adjustment by pressing the x button. In adjusting
each disc, the mirror time is measured to check the disk type. In
the auto adjustment, whether the disc type is correct is not checked
unlike conventional models, and accordingly, take care not to in-
sert a different type of disc.
6-5 |
ACEC
SONY
