Using the appliance
Starting the programmePause function
1. Scrape or rinse off solid food remnants.With the pause function the programme can be interrupted
2. Load the dishwasher. for a short period of time.
See the basket and loading1. Press in the On/Off button. The programme stops.
3. Put the correct amount of detergent into the 2. All lamps goes out.
detergent dispenser and close the lid.
3. When you want the programme to continue again,
4. Close the door.you press the On/Off button. The programme
5. Press in the On/Off button. All programme continues.
indicator lamps are lit.The programme should not be paused for any
6. Press in the required programme button (see pro-longer then necessary, because the water inside
gramme chart). All other programme indicator the dishwasher has cooled down and must be
lamps go out. The lamp always indicates which heated again which increases the power
consumption.
part of the selected cycle the dishwasher is in.
7. Check the Ţlters to see if they need to be cleaned
when the dishwasher has Ţnished the programme.Cancelling the drying phase
In case you do not want to wait until the drying phase is
completed, you can cancel it.
Interrupting the programme temporarily
1. Press in the On/Off button.
1. Open the door. The programme stops.
2. The programme indicator lamp is lit.2. Open the door. The drying phase is cancelled.
3. Close the door and the programme continues Switching the dishwasher off
after about six seconds.
Switch the dishwasher off, when the indicator lamp
Open the door carefully when the dishwasherfor the programme cycle end is lit or the display shows 0.
is running, since hot steam may escape.
1. Press in the On/Off button.
Cancelling the programmeBe careful if you open the door immediately
1. Press and hold in the combination buttons, the after the programme is Ţnished, since hot
machine goes to starting position and all pro-steam may escape.
gramme indicator lamps are lit.
This dishwasher is equipped with the new �ush
2. Release the buttons. The programme is now system called �IMPULSE WASHING�. This
cancelled and a new programme can be selected.washing system varies both the revolutions of
the pump and the water pressure for more inten-
If you switch the dishwasher off with the On/Off sive cleaning of the dishes during a programme.
button, the selected programme is not Ţnished, itThat is why different sections of the programme
is only disrupted. When you start the dishwasher
again, the programme will continue.cycle do not sound the same.
Cleaning the dishwasher
Clean the outside surfaces of the appliance using a mild
non-abrasive
removing remaining traces of the product with a damp cloth.
Do not use cleaning products which contain
spirits
stances.
- 10 - |
ACEC
DOMETIC
