Installation instructions
Positioning
You can install this dryer in a number of different
ways. We will show you the most suitable of these.
Whichever way you install it, here are some points
to bear in mind:
lAlways ensure that the dryer is level for
optimum functioning.
lThe temperature in the room should not
exceed +35! C when the dryer is operating.
If it does, open a door or window while the
dryer is on. The dryer uses the air in the
room for cooling.
lThe area around the dryer should be as
dust-free as possible.
l If you install the dryer with its door hinge
side towards a wall, or next to a cupboard
or wall unit which is more than 370 mm
deep, you will need to leave a space on the
hinge side at least 30 mm wide. This is to
allow the door to open wide enough for
removing the water tank.
l Ensure the air ducts are not obstructed.
l The dryer must not be installed above a
bath or in a shower area.
The adjustable feet must not be removed,
they ensure that there is adequate venti-
lation underneath the dryer.
Electrical supply
The dryer is supplied with a lead and electrical plug
for connection to an earthed wall socket 240 V 10 A.
If the dryer is installed in a bathroom
without fixed wiring to the electrical
supply, an earth leakage circuit breaker
(or RCD) must be used.
If the dryer is to have fixed wiring to the
electrical supply, this should only be
carried out by a qualified electrician or
competent person.
- 14 - |
ACEC
DOMETIC
