Activating/deactivating the pilot tone
evaluation PILOT
Via the ŤPILOTŽ menu, you can activate or deactivate the
pilot tone evaluation.
The pilot tone supports the receiver?s squelch function
(Squelch) and protects against interference due to RF
signals from other units. The transmitter adds an inaudible
signal, known as the pilot tone, to the transmitted signal.
The receiver detects and evaluates the pilot tone, and is
thus able to identify the signal of the matching transmitter
and mute all others.
Transmitters of the ew 500 series (first generation) do not
transmit a pilot tone and the receivers of the ew 500 series
(first generation) cannot evaluate the pilot tone.
Nevertheless, you can combine the EK 500 G2 receiver with
a transmitter of the first generation. However, when
combining units, please observe the following:
y With an ew 500 G2 transmitter and the ew 500 G2
receiver:
Activate the pilot tone function with both transmitter
and receiver.
y With an ew 500 transmitter and the ew 500 G2 receiver or
vice versa:
Deactivate the pilot tone function with the ew 500 G2
transmitter or receiver.
Activating/deactivating the lock mode LOCK
Via the LOCKŽ menu, you can activate or deactivate the
lock mode.
The lock mode prevents that the receiver is accidentally
programmed or switched off during operation. The lock
mode icon on the display indicates that the lock mode is
activated.
To deactivate the lock mode, first press the SET button and
then press the / rocker button to select ŤLOC.OFFŽ. If
you confirm your selection by pressing the SET button, the
buttons can be operated as usual.
Exiting the operating menu EXIT
Via the EXITŽ menu, you can exit the operating menu and
return to the standard display.
25 |
ACEC
SENNHEISER
