CARE AND MAINTENANCE OF
CONVENTIONAL ELECTRIC COOKTOPS
Before cleaning the cooktop, disconnect itStainless ste from el cooktop
the electrical supply and wait until it? has cUse a pooledrop.rietary cleaning product for
stainless steel.
Care and Maintenance of conventional
cooktopN.B: Prolonged use of the cooktop may result in
slight discoloration of the stainless steel surfaces
? Use a cloth and warm soapy water.
around the hotplates. This is caused by the high
? Do not use abrasives, corrosive cleaners, temperature of the hotplates.
cleaners containing chlorine or pan scourers.
Cleaning the hotplates
? Do not leave acidic substances on the Clean the hotplates when they are warm
cooktop (vinegar, salt, lemon juice, etc.).
(not hot!). Use a cloth moistened with water and
salt. Dry and clean with a cloth moistened with
cooking oil.
CARE AND MAINTENANCE OF
GLASS-CERAMIC COOKTOPS
Clean the cooktop, when it is cool, after each
use. This will prevent the build-up of dirt and
make cleaning easier.
? Use a clean cloth, absorbent kitchen wipes
and washing up liquid or a specific glass-
ceramic hob cleaner.
? Remove baked-on dirt with the supplied
scraper tool and specific cleaning products.
? Food spills should be cleaned off before they
bake onto the glass-ceramic surface.
? Do not use abrasive products, bleach, oven-
cleaner spray or pan scourers.
? The cooktop should be treated periodically
with a proprietary brand of protective wax for
glass-ceramic hobs.
TROUBLESHOOTING GUIDE
Oven not workingCooktop not working
? Switch the oven off and then on again ? to sEnsuee re that the cooktop is receiving electrical
if the problem persists.power.
? Check for the presence of mains electrical? Control knob se t to ?0??
power.Set the main disconnect switch upline of the
? Oven selector on position ?0?, ?appliance to ?OFF? for a few minutes and
? Check whether you have made the then back to ?ON? and see if the problem
temperature setting and the function sepetting.rsists.
? If the electronic programmer display presents
the message ?OFF?, press any key to reset
the oven and then set the clock.
? Ensure that the analogue programmer
(depending on model) is set to .
25 |
ACEC
BAUKNECHT
