GETTING READY
IMPORTANT! YThe CHARGE lamp flashing red indicates that an error
YIt takes about two hours to achieve a full charge. Ac-occurred while charging. An error can be caused by
tual charging time depends on current battery capac-any of the following: a problem with the cradle, a prob-
ity and charging conditions.lem with the camera, or a problem with the battery or
YUse only the USB cradle to charge the special NP-20how it is loaded. Remove the camera from the cradle
rechargeable lithium ion battery. Never use any otherand see if it works normally.
charger device.YThe USB cradle can be used for charging or USB data
YUse only the bundled AC adaptor. Never use anycommunication only.
other type of AC adaptor. Do not use optionally avail-
able AD-C620 and AD-C630 AC adaptors with this NOTE
camera.
YMake sure that the camera connector of the USBYUSB cradle is designed for operation with any power
supply in the range of 100V to 240V AC. Note, how-
cradle is securely inserted into the cameraOs connec-
tor as far as it will go.ever, that the shape of the AC power cord plug varies
YThe CHARGE lamp may remain amber colored andaccording to country or geographic area. If you plan to
use the cradle in another geographic area, you need
the charge operation may not start right away if you try
to charge immediately after using the camera (whichto purchase a commercially available AC power cord
causes battery to become warm) or when it is too hotthat is compatible with the power outlets in that area.
or too cold where you are performing the charge op-
eration. If this happens, simply wait until the battery
reaches normal temperature. The CHARGE lamp will
turn red and charging will start when the battery tem-
perature returns to the allowable charging tempera-
ture range.
25 |
ACEC
CASIO
