Prior to Using for the Firs13t Time
Setting electronically:
1. Press the ON/OFF button.
3If the name of a stage of a cycle is shown on the display, this means a rinsing cy
cle is active. You must first of all cancel the rinsing cycle:
- Press the RESET key combination.
The display will read CONFIRM CANCEL?
- Press the OK/START button. This will cancel the rinsing cycle.
2. Go to the WATER HARDNESS setting; see section ŤAdapting an option/setting.
3. Set WATER HARDNESS to the right setting.
If the water softener is set electronically to 1 this switches off the display of
the REFILL SALT message.
Water hardnessAdjusting the hardness setting
1)2)
in °din mmol/lRangeManualElectronic
3)
51 709,0 12,510
43 507,6 8,99
37 426,5 7,5IV8
29 365,1 6,42*7
23 284,0 5,06
19 223,3 3,95*
III
15 182,6 3,24
11 141,9 2,5II3
4 100,7 1,8I/II12
1
below 4below 0.7I
no salt necessary
1) (d) German degree, measure of the hardness of water
2) [mmol/l] millimol per litre, international unit for water hardness
3) On this setting the length of the dishwashing cycle may be slightly longer.
*) factory setting |
ACEC
AEG
