Operating Instructions
...there are problems with the operation of the dish-
washer.
SymptomPossible CauseSolution
The door of the dishwasher is
Shut the door.
not closed properly.
Mains plug is not plugged in. Insert mains plug.
The programme does
not start.House fuse in defective.Replace fuse.
If the dishes are to be
A delay start is selected.washed immediately, set the
delay start to 0 hours
The washing compartment is Only wash cutlery and dishes
made of corrosion-resistant that are suitable for dish-
stainless steel. Rust spots in washer use.
the washing compartment
Rust spots are visible in are from particles from out-
the washing compart-side the appliance (rust par-
ment.ticles from the water pipe,
Close the lid of the special
from pans, cutlery, etc.).
salt container securely.
Remove such spots with a
commercially available stain-
less steel cleaner.
There is a whistling The whistling is not a cause Use a different brand of
noise during washing.for concern.detergent.
Mains plug is not plugged in. Insert mains plug.
Dishwasher interior
lighting does not work.Light bulb for the interior Contact AEG Service Force.
lighting is defective.
...the wash result is not satisfactory.
The dishes are still dirty.
- The wrong wash programme was selected.
- The dishes were arranged in such a manner that water has not
reached all parts. The dish racks must not be overloaded.
- The filter in the base of the washing compartment is dirty or incor-
rectly positioned.
- Detergent was not used or too little was used.
- In the case of scale deposits on the dishes: the special salt container
is empty or the water softener is incorrectly adjusted.
33 |
ACEC
AEG
