CLEANING BETWEEN THE OUTER ANDTO REPLACE THE OUTER GLASS
INNER DOOR GLASS
1. Open the oven door with care and place in the
park position at an angle of approximately 30°.
Under no circumstances should the door
assembly be detached from the product for
cleaning. Please refer to the cleaning
instructions.
The outer door glass is removable for cleaning.
TO REMOVE THE OUTER GLASS
1. Open the oven door slightly to gain access to the
two cross head screws on the top of the oven
door.2. Holding the oven glass with both hands, gently
place the locators into the holes of the brackets
2. Loosen the two screws using a Pozidriveat the bottom of the oven door.
screwdriver.
3. Push the top of the oven glass towards the oven
door, ensuring the screw location holes line up.
4. Ensure the trim is correctly positioned on the top
oven / grill door.
5. Hold the glass in place at the top of the door.
Insert the cross head screws into the location
holes. Give the screws one turn to ensure the
glass is secure.
6. Tighten the screws positively with a Pozidrive
screwdriver before closing the oven door.
3. Hold the door glass securely in place with one
hand before removing the screws completely withDo not attempt to use the oven without the
the other hand.
The screws and washers retain the trim on theglass being in place.
top of the grill / top oven door.
Note the position of the trim on the door.
If the door glass panel becomes chipped or
4. Using both hands, gently tilt the top of the doorhas deep scratches the glass will be
weakened and must be replaced to prevent
glass towards you, lift slightly to disengage the
locators from the two bottom brackets. The doorthe possibility of the panel shattering.
Please contact your local After Sales
will remain in a parked position at an angle ofService who will be pleased to advise
approximately 30°.
further.
5.Clean the outer and inner glass using hot soapy
water or Hob Brite may be used with care. DO
NOT use Hob Brite on the Stainless Steel orTO CLEAN THE INNER GLASS DOOR
painted finishes. DO NOT try to clean the foilPANELS
which is inside the door. The foil is there to help
keep the door cool, if it is damaged it will notClean the inner glass door panels using a soft cloth
work. Ensure that all parts are well rinsed andand hot water to which a little washing up liquid has
thoroughly dried before attempting to replacebeen added. If the inner panel is heavily soiled, Hob
the outer door.Brite may be used. Do not use abrasive cleaning
materials on the door glass. Ensure that all parts are
well rinsed and thoroughly dried before attempting to
replace the glass.
31 |
ACEC
OTHERS
