8ENGLISH
Using the appliance
1 Pull the cord out of the appliance and put the mains plug in the wall socket.
2 Switch the appliance on by pressing the on/off button on top of the appliance with your foot
(fig. 17).
� During vacuum cleaning you can adjust the suction power by means of the knob on top of
the appliance (fig. 18).
- Use maximum suction power for vacuum cleaning very dirty carpets and hard floors.
- Use minimum suction power for vacuum cleaning curtains, table carpets, etc.
� If you want to pause for a moment, you can park the tube in a convenient position by
inserting the ridge on the nozzle into the parking slot (fig. 19).
Active Fragrance Control (specific types only)
The scent granules have been specially developed for use in your Philips vacuum cleaner. Only use
the Philips s-fresh` scent granules in your vacuum cleaner.
If the vacuum cleaner is equipped with Active Fragrance Control, keep it out of the reach of
children, both during and after use. Store the vacuum cleaner in a locked cupboard if there are
small children in the house.
The scent granules are not edible.
In case of eye contact, flush immediately with plenty of water.
Filling the cartridge
1 Place your thumb and index finger on the sides of the cartridge. Remove the cartridge from
the holder by pressing on the disc (fig. 20).
2 Remove the cap of the cartridge by pulling while applying pressure on the small pressing
points (fig. 21).
3 Open the package at the small opening at the top.
4 Fill the cartridge with the contents of one whole package of scent granules.
5 Close the cartridge by putting the cap back onto it (you will hear a click).
6 Re-insert the cartridge into the holder (you will hear a click). It only fits into the holder in
one way (fig. 22).
Replace the granules when the cartridge no longer emits any fragrance.
Setting the fragrance level
1 You can set the fragrance level by turning the cartridge forwards (maximum emission) and
backwards (minimum emission) (fig. 23).
2 When you store the vacuum cleaner or don't want any fragrance to be emitted, close the
cartridge by turning it backwards until the openings of the cartridge are no longer visible.
Storage
1 Switch the appliance off and remove the mains plug from the wall socket.
2 Rewind the mains cord by pressing the cord rewind button (fig. 24). |
ACEC
PHILIPS
