1,5 m. Maximum
60 cm. Mini-90 cm. Maximum
IMPORTANT: The distance from the floor to the highestELECTRICAL CONNECTIONS
part of the hose should be between 60 to 90 cm. (It is
advised to be between 60 and 70 cm). The hose must notBefore plugging the appliance make sure that:
be bent nor twisted to avoid clogging. Should a prolongation
of the discharging hose be unavoidable this must never11 the mains of your installation is the same as on the
surpass 1.5 m and must be of the same diameter as therating plate of your appliance (the plate is sticked to the
original hose.rear of the appliance).
Make sure the hoses are not too tense.21 The meter, the fuses, the wiring and the socket outlet
can support the max. power absorbed stated on the rating
LEVELLINGplate.
Level the appliance by loosening or tightening the feet.31 The socket base and the plug must fit in adequately
Once in the right position fix the feet by pushing the nutswithout any reducing interposition, multiple outlets or
adapters. If necessary replace the socket outlet by an
against the base of the case. Accurate levelling will preventadequate one.
vibration, noise and displacement of the appliance during
operation.The applicable rules for electrical security require an
adequate earthing. The plug of the appliance is
Some vibration is inevitable, especially if placed on aprovided with such a device.
wooden floor. Wooden floors are particularly susceptible to
vibrations. For advice, consult a builder. If posible alwaysMake sure your socket outlet is provided with an
place the appliance on a solid floor. adquate earthing too.
The manufacturer declines any liability in case of
accidents or incicents should these safety measures
not be observed.
(Never touch the washing machine or any electric appliance
while standing on a wet floor or being barefoot.)
16 |
ACEC
ZANUSSI
