132992260 gb.qxd 4/24/03 3:26 PM Pagina 16 (Nero/Process Black pellicola)
Emergency emptying outFrost precautions
If the water is not discharged, proceed as follows toIf the machine is installed in a place where the
empty out the machine:temperature could drop below 0°C, proceed as
pull out the plug from the power socket; follows:
close the water tap; Close the water tap and unscrew the water inlet
hose from the tap.
if necessary, wait until the water has cooled down;
place a bowl on the floor; Place the end of the drain hose and that of the inlet
put the drain hose end into the bowl and let thehose in a bowl placed on the floor.
water come out. Select the drain programme ?N? and run it until the
machine stops.
Remove the plug from the socket.
Screw the water inlet hose back on and put the
drain hose back in its place.
By doing this, any water remaining in the machine is
removed, avoiding the formation of ice and,
consequently, breakage of the affected parts.
When you use the machine again, make sure that
the ambient temperature is above 0°C.
16 |
ACEC
ZANUSSI
