all-fo1470se.book Page 51 Saturday, January 6, 2001 10:53 AM
Quick Reference Guide
When to replace the imaging 3. Pull the paper release plate toward you
and insert the stack of paper into the tray,
film
print side down.
Replace the imaging film when the display "If paper remains in the tray, take it out and
shows:combine it into a single stack with the
FILM END
new paper before adding the new paper.
Use the following imaging film, which is
available from your dealer or retailer:
Sharp FO-15CR Imaging Film
Caution!
The text of documents printed with the
imaging film is visible on the used film.
If confidential information has been
printed, dispose of the film
appropriately.
4. Replace the paper cover on the paper
Loading Paper in the Paper tray.
Tray
Important: Be sure to replace the
paper cover before you put back the
You can load up to 200 sheets of A4 paper release plate down.If paper
paper (max. 75 g/m2) in the paper tray.
remains in the tray, take it out and
combine it into a single stack with the
Caution!
new paper before adding the new paper.
Do not use the blank side of paper that
has already been printed on.
1. Remove the paper cover if it is on the
paper tray.
Note: If the display shows the
following alternating messages when
making a copy or receiving a fax,
2.Fan the paper, and then tap the edge
check the paper tray. If the tray is
against a flat surface to even the stack.
empty, add paper and then press the
ENGLISH
START key. If there is paper, make
sure it is inserted correctly and then
press the START key.
51 |
ACEC
SHARP
