Setting the time data
When the user bits and time code are both to be used,User bits memory function
the user bits are set first.The user bits settings (except for the actual time) are
If the time code is set first, the time code generatorautomatically saved in the memory and retained even
will stop while the user bits are being set so that theafter the power is turned off.
time code setting will be off.
The time code setting range extends from 00:00:00:00<Notes>
to 23:59:59:29.OIn the camera image recording mode, the tape
management information shown on page 69 is
output.
Setting the user bits
OWhen DATE is selected from the UB MODE items,
the real time operations for year/month/day of the
In the internal colour bar signal recording mode,
TIME/DATE screen are adhered to.
memos (dates and times) of up to six hexadecimal
OWhen TIME is selected from the UB MODE items,
digits can be recorded on the sub-code track by
the real time operations for hours/minutes/seconds
setting the user bits.
of the TIME/DATE screen are adhered to.
OThe user bits setting contents are output to the six
1Set the OUTPUT (output signal selector)/AUTOhigher digits of the user bits in the VIDEO AUX area
KNEE switch to BARS.
(which used to be the VITC area). In the internal
colour bar signal recording mode, they are also
output to the six higher digits of the LTC user bits.
2Set the DISPLAY switch to UB.
OThe user bits cannot be set since the active frame
information and other tape management
Set the TCG switch to SET.information is always output to the two lower digits
3
of the user bits.
Set the user bits using the SHIFT button, + button
4
and button.
SHIFT button:
This is used to start the digit to be set flashing.
Each time it is pressed, the flashing moves by
one digit to the right.
+ button:
2
This increments by 1 the numerical value of the
flashing digit.
button:
This decrements by 1 the numerical value of the
3,5
flashing digit.
A to F in hexadecimal notation are displayed as follows:
Hexadecimal
ABCDEF
notation
4
Display
1
Set the TCG switch to F-RUN or R-RUN.
5
Select UB MODE item on the TC/UB screen of
6
VTR MENU.
66 |
ACEC
PANASONIC
