FS-SD58V_A4.fm Page 21 Thursday, September 28, 2000 4:52 PM
Using the Timers
REMOTE CONTROL
DIMMERSLEEP
SLEEPDISPLAYFM MODEMPXDOOR SLIDE
AHB PROCONTRTONEOLCLOCK/ TIMER
CLOCK/TIMERON time, OFF time,
EnglishPLAY MODE REPEATCANCELSource, Volume
HIGHLIGHTVIDEO INTRO STILL
PBC ON / OFFVCD NUMBERON SCREEN
UPTimer indicator
PREVSELECTNEXTUP
<SETSLEEP>SLEEP indicator
DOWNDOWN
FADE MUTINGVCD NUMBER
MD / AUXCDFM / AM
VOLUME
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
The timers let you control listening functions automatically.
4Press the UP or DOWN button to set the
minute.
Setting the ClockYou can use the > or < button instead of the UP or
DOWN button.
(Using the Remote Control)
? You can set the clock whether the System is 5turned on or ofPress the SET bf.utton.
? When you plug the AC power cord into the wall outlet, The selected time is set and the seconds start counting
the time indication ?0:00? blinks on the displayfrom 0..
To change the set time, press the CLOCK/TIMER but-
ton three times to display the clock, and then repeat
from step 2.
? The clock must be correctly set for the timers to work.
? The procedure must be completed within two minutes. CAUTION:
Otherwise, the setting is cleared and must be repeated
? If there is a power failure, the clock loses its
from the beginning.
setting after about 20 minutes. ?0:00?
blinks on the display and the clock must be
CLOCKreset.
/ TIMER
UPDOWNSET
or
? The clock may gain or lose one to two minutes per month.
1Press the CLOCK/TIMER button on the
Remote Control.
The hour digit of the time indication rapidly blinks on
Setting the Daily Timer
the display.
(Using the Remote Control)
2Press the UP or DOWN button to set the
Once you have set the Daily Timer, the timer will be acti-
hour.
vated at the same time every day.
Pressing the UP button moves the time forwards andThe Timer indicator on the display shows that the Daily
pressing the DOWN button moves it backwards. Timer Holdyou have set is in effect.
down the button to move the time rapidly.
If the unit is already turned on at the ON time of the timer,
You can use the > or < button instead of the UP or
the timer does not work.
DOWN button.
3Press the SET button.
The minute digits of the time indication rapidly?Perform ea blinch setk onting within 30 seconds. Otherwise, set-
the display.ting will be cleared and the procedure must be repeated
from the beginning.
21 |
ACEC
JVC
