BA Funk-Schalter (kh)_GB_.book Page 14 Monday, July 1, 2002 10:08 AM
4. Place the screwdriver behind the second fuse (2)
and press it out of the holder, then fit it in place
of the first fuse.
5. Push the holder back into the housing and plug
the actuator into the socket.
6. Investigate the cause of the blown fuse:
Compare the Wattage or Volt/Ampere details of
the previously connected consumer unit with
the details given in OTechnical Data � maximum
switching capacity� and check the consumer
unit for visible damage. If in doubt connect it
directly to the socket.
Printed in Germany
1/06.02/0,4
Subject to modifications!
No liability can be accepted for typographical
errors.
14 |
ACEC
LOEWE
