Solving problems
Solving problems
Cleaning the water intake filter
A filter is incorporated in the intake
hose attached to the dishwasher?s shut-
off valve. If your water is hard, or the
pipes contain sediment; this filter may
clog and prevent enough water from
entering the wash cabinet. It can be
cleaned as follows:
The plastic valve housing on the in-
take hose contains electrical com-
ponents and should not be im-
mersed, or run through water.
^ Return the filter and seal. Make sure
Cleaning the filter:they are seated correctly.
Disconnect the dishwasher from^ Screw the intake hose back on the
electricity (unplug it or ?trip? the circuitwater valve, checking that it is not
breaker).cross-threaded.
^ Turn off the main shutoff valve and^ Slowly turn on the valve and test for
unscrew the intake hose.leaks.
^ Carefully remove the rubber seal.
^ Remove the filter using needle noseInstalling an in-line water filter
^ If your water contains a large number
pliers and rinse under running water.of insoluble substances, a filter be-
tween the valve and the intake hose
connection is recommended. These
filters can be purchased from the
Miele Technical Service Department.
51 |
ACEC
MIELE
