SECTION 1The operating instructions mentioned here are partial abstracts
from the Operating Instruction Manual. The page numbers of
GENERALthe Operating Instruction Manual remain as in the manual.
Getting StartedCustomizing Your MonitorGetting StartedGetting StartedCustomizing Your Monitor
Before adjusting
Identifying Parts and ControlsY Connect the monitor and the computer, and turn them on.Adjusting the Picture Contrast
Y Select OLANG� in the MENU OSD, then select
See the pages in parentheses for further details.OENGLISH� (English) (see page 17).Once the setting is adjusted, it will be stored in memory for
all input signals received.
FrontRear
Adjusting the Picture Brightness1Press the > (contrast) ?// buttons.
The BRIGHTNESS/CONTRAST OSD appears.
Once the setting is adjusted, it will be stored in memory for
BRIGHTNESS/CONTRAST
all input signals received.
2626
RESETASCHD15BNCINPUTMENU1Press the ? (brightness) ./> buttons.80.0kHz/ 75Hz
The BRIGHTNESS/CONTRAST OSD appears.
BRIGHTNESS/CONTRASTHorizontalVertical
Frequency*Frequency*
2626
80.0kHz/ 75Hz2Press the >?// buttons again to adjust the picture
contrast.
1 RESET (reset) button (page 17)8 AC IN connectorHorizontalVertical
Frequency*Frequency*
Resets the adjustments to the factory settings.Provides AC power to the monitor./ . . . for more contrast
1-1
2 ASC (auto sizing and centering) button9 Video input 1 connector (HD15)2Press the ?./> buttons again to adjust the picture? . . . for less contrast
(page 7)Inputs RGB video signals (0.714 Vp-p, positive) andENbrightness.EN
Automatically adjusts the size and centering of theSYNC signals.
images.The OSD automatically disappears after about 3 seconds.F
F
1> . . . for more brightness
3 INPUT (input) button and HD15/BNC. . . . for less brightnessTo reset, press the RESET button while the OSD is on. The5 4 3 2
indicators (page 8)10 9 8 7 6ESESbrightness and contrast are both reset to the factory settings.
Selects the HD15 or 5BNC video input signal. Each time15 14 13 12 11
you press this button, the input signal andThe OSD automatically disappears after about 3 seconds.C* The horizontal and vertical frequencies for the received inputC
corresponding indicator alternate.Pin No. SignalPin No. Signalsignal appear in the BRIGHTNESS/CONTRAST OSD.
1Red8Blue GroundTo reset, press the RESET button while the OSD is on. The4 ? (brightness) (./>) buttons (pages 8 �
brightness and contrast are both reset to the factory settings.
17)2Green9DDC + 5V*
10GroundAdjust the picture brightness.(Composite
Sync on Green)* The horizontal and vertical frequencies for the received input
Function as the (./>) buttons when adjusting other11Groundsignal appear in the BRIGHTNESS/CONTRAST OSD.
items.3Blue12Bi-Directional
4GroundData (SDA)*
5 MENU (menu) button (pages 8, 10 -17)
Displays the MENU OSD.5DDC Ground*13H. Sync
6Red Ground14V. Sync
6 > (contrast) (?//) buttons (pages 8 � 17)
7Green Ground15Data Clock(SCL)*
Adjust the contrast.
* Display Data Channel (DDC) Standard of VESA
Function as the (?//) buttons when adjusting other
items.!1 Video input 2 connector (5 BNC)
Inputs RGB video signals (0.714 Vp-p, positive) and
7 u (power) switch and indicator (pages 19,SYNC signals.
22)
Turns the monitor on or off.
The indicator lights up in green when the monitor is
turned on, and lights up in orange when the monitor is
in power saving mode.
59 |
ACEC
SONY
