MAN-GM-6300T-GB.fm Page 7 Thursday, November 16, 2006 4:23 PM
Connecting the Unit
Using the Speaker InputConnecting the Speakers and Input Wires
Connect the car stereo speaker output wires to the amplifiers using the supplied The speaker output mode can be four-channel, three-channel (stereo + mono) or two-
speaker input connector.channel (stereo, mono). Connect the speaker leads to suit the mode according to the
? Do not connect both the RCA input and the speaker input at the same time.figures shown below.
( Connections when using the speaker inputFour-channel mode
Green: CH B, Left +RCA input
jack A(Right)RCA input
Green/black: CH B, Left -jack BSpeaker out A
Input Select Switch(Left)
For two-channel input, slide this -
switch to the left. For four-
channel input, slide this switch to
Violet/black: CH B, Right -
the right.
Violet: CH B, Right +
Car Stereo
Gray: CH A, Right +Connecting wires with
RCA plugs (sold
Gray/black: CH A, Right -separately)
-
Speaker input Speaker output(Left)From car stereo (RCA output)
connectorSpeaker out BIf only one input plug is used, such as when the car stereo
To speaker input White/black: CH A, Left -has only one output (RCA output), connect the plug to (Right)
terminal of this RCA input jack A, but do not connect a plug to RCA input
unit.jack B.
White: CH A, Left +
Three-channel mode
RCA input
RCA input jack A(Right)
jack BSpeaker out A
Input Select Switch(Left)
For two-channel input, slide this
switch to the left. For four-channel
input, slide this switch to the right.
Connecting wires with
RCA plugs (sold ENGLISH
separately)
From car stereo (RCA output)
If only one input plug is used, such as when the car stereo
has only one output (RCA output), connect the plug to Speaker out B
RCA input jack A, but do not connect a plug to RCA input
(Mono)
jack B.
7 |
ACEC
PIONEER
