How to mount lens
Important:
Y Be sure to turn off the power of the CCU before mounting a lens.
Y A lens whose projection length of the lens mount section is 4 mm or less shall
be used.
Y The recommended lens aperture ranges from F2.2 to F16. Selection of less
than F2.2 of the lens aperture may result in image blurring.
Y When a zoom lens is used, focus adjustment method varies with the lens. ForC-mount:
further information, refer to the operating instructions for the lens.less than 4 mm {5/32"}
Y When the lens is removed, be sure to put the cap on the lens mount section of
the camera head.
zRemove the lens cap from the lens mount section of thexTurn a C-mount lens clockwise to engage the lens with
camera head.the lens mount section.
Important:
Y Check to see whether the surface of the optical filter is
clean before mounting a lens. If the surface is dirty, use
a blower brush for general camera to remove dust.
Recommended lenses (as of October 2007)
ManufacturerModel Model number
FUJINONHigh Definition Fixed LensHAF4.8DA-1
FUJINONHigh Definition Zoom LensHA4x7.5DA-1
FUJINON3CCD Camera LensTF2.8DA-8
FUJINON3CCD Camera LensTF4DA-8
FUJINON3CCD Camera LensTF8DA-8
FUJINON3CCD Camera LensTF15DA-8
14 |
ACEC
PANASONIC
