MasterPage: Start_Right
GR-D650US.book Page 43 Monday, February 27, 2006 9:38 AM
EDITINGEN 43
NOTES:
Dubbing To Or From A Video Unit
IIt is recommended to use the AC Adapter as
Equipped With A DV Connector the power supply instead of the battery pack.
( pg. 15)
(Digital Dubbing) IIf a blank portion or disturbed image is played
back on the player during dubbing, the dubbing
It is also possible to copy recorded scenes from may stop so that an unusual image is not dubbed.
the camcorder onto another video unit equipped IEven though the DV cable is connected correctly,
with a DV connector. Since a digital signal is sometimes the image may not appear in step 4. If
sent, there is little, if any, image or sound this occurs, turn off the power and make
deterioration. connections again.
IIf OPlayback Zoom� ( pg. 25) or OPlayback
Special Effects� ( pg. 25) is attempted or
SNAPSHOT is pressed during playback, only the
original playback image recorded on the tape is
output from the DV IN/OUT connector.
IWhen using a DV cable, be sure to use the
optional JVC VC-VDV204U or VC-VDV206U DV
cable.
To use this camcorder as a recorder
To DV IN/OUT
1Make sure all units are turned off.
2Connect this camcorder to a video unit
equipped with a DV output connector using a DV
cable as shown in the illustration.
3Set the camcorderOs Power Switch to OPLAY�.
4Set OREC MODE� to OSP� or OLP�. ( pg. 35)
Core Ţlter5Start playback on the player.DV cable (optional)
6Press the Recording Start/Stop Button to
engage the Record-Pause mode.
YThe ODV IN� indication appears on the
screen.
To DV IN/OUT
7At the point you want to start dubbing, press
the Recording Start/Stop Button to start
dubbing. The indication rotates.
ADVANCED FEATURES
8Press the Recording Start/Stop Button again
Video unit equipped with DV connectorto stop dubbing. The indication stops
rotating.
To use this camcorder as a player9Press 7 to return to the normal playback
mode.
1Make sure all units are turned off.
2Connect this camcorder to a video unit NOTE:
Digital Dubbing is performed in the sound mode
equipped with a DV input connector using a DV
recorded on the original tape, regardless of the
cable as shown in the illustration.
current OSOUND MODE� setting. ( pg. 32)
3Start playback on the camcorder. ( pg. 22)
4At the point you want to start dubbing, start
recording on the video unit. (Refer to the video
unitOs instruction manual.)
5To stop dubbing, stop recording on the video
unit, then stop playback on this camcorder. |