80 ENUSER MAINTENANCE
After UseCleaning The Camcorder
Turn off the camcorder.To clean the exterior, wipe gently with a soft
11cloth.
Put the cloth in diluted mild soap and wring it
Slide and hold OPEN/EJECT in the direction ofwell to wipe off heavy dirt. Then wipe again
2the arrow, then pull the cassette holder coverwith a dry cloth.
open until it locks. The cassette holder opens
automatically. Remove the cassette.Press PUSH OPEN and open the LCD monitor.
2Wipe gently with a soft cloth. Be careful not to
Press OPUSH HERE� to close the cassette holder.damage the monitor. Close the LCD monitor.
3YOnce the cassette holder is closed, it recedes
automatically. Wait until it recedes completelyTo clean the lens, blow it with a blower brush,
before closing the cassette holder cover.3then wipe gently with lens cleaning paper.
Slide BATT. RELEASE 1 and remove the batteryTo clean the viewfinder, raise it to the vertical
4pack 2 .4position. Carefully lift the plastic tab on the
bottom of the viewfinder, and open the hatch
1.
Insert a lens blower or soft cloth into the gap at
PUSH HERE5the bottom of the viewfinder and clean the
interior of the viewfinder with it 2 .
Remove.
Cassette holderClose the hatch. Tilt the viewfinder back to the
6horizontal position and push it back in.
NOTES:
IAvoid using strong cleaning agents such as benzine
or alcohol.
ICleaning should be done only after the battery
pack has been removed or other power units have
OPEN/EJECTbeen disconnected.
SwitchIMould may form if the lens is left dirty.
IWhen using a cleaner or chemically treated cloth
Cassetterefer to the cautions of each product.
holder cover
1
2
BATT. RELEASE
Switch
1Hatch2
Lens blower |
ACEC
JVC
