USER MAINTENANCE
92 EN
After UseCleaning The Camcorder
Turn off the camcorder.To clean the exterior, wipe gently with a soft
11cloth.
Put the cloth in diluted mild soap and wring it
Slide OPEN/EJECT in the direction of the arrow,well to wipe off heavy dirt. Then wipe again
2then swing the cassette holder cover open untilwith a dry cloth.
it locks. The cassette holder opens automati-
cally. Remove the cassette.Press PUSH-OPEN and open the LCD monitor.
2Wipe gently with a soft cloth. Be careful not to
Press OPUSH HERE� to close the cassette holder.damage the monitor. Close the LCD monitor.
3YOnce the cassette holder is closed, it recedes
automatically. Wait until it recedes completelyTo clean the lens, blow it with a blower brush,
before closing the cassette holder cover.3then wipe gently with lens cleaning paper.
Press BATT. RELEASE and remove the batteryTo clean the viewfinder, raise it to the vertical
4pack.4position. Carefully lift the plastic tab on the
bottom of the viewfinder, and open the cover
1.
Insert a lens blower or soft cloth into the gap at
5the bottom of the viewfinder and clean the
interior of the viewfinder with it 2.
Close the cover. Tilt the viewfinder back to the
Cassette holderRemove.6horizontal position and push it back in.
NOTES:
cAvoid using strong cleaning agents such as benzine
or alcohol.
cCleaning should be done only after the battery
pack has been removed or other power units have
been disconnected.
OPEN/EJECTcMould may form if the lens is left dirty.
Switch
cWhen using a cleaner or chemically treated cloth
refer to the cautions of each product.
Cassette holder
cover
PUSH HERE
Cover
1
BATT. RELEASE
Button
1
3
22
Lens blower |