PLAYBACK Using The Cassette Adapter
EN37
Cassette Adapter
Use this to play back a VHS-C video cassette recorded
with this camcorder on a VHS VCR. It is fully compatible
with any VHS video cassette recorder. The C-P7U
(provided only with the GR-FX53/FX43/FX33) or C-P6U
(optional) adapter is battery powered and automatically
performs tape loading and unloading.
INSERT BATTERY
1Slide the battery cover up to remove it, and install
one OR6 (AA)� size battery as shown in the
VCRillustration on left, then reattach the cover.
INSERT CASSETTE IN ADAPTER
2Slide the latch to open the adapter compartment
Compartment doordoor, then insert the cassette and close the
compartment door.
PLAY BACK ON CONNECTED VCR
3Load the cassette adapter into the VCR and play the
tape back as you would any other.
REMOVE CASSETTE FROM ADAPTER
4Slide the latch and the compartment door opens
automatically. This may take around 10 seconds. Do
not attempt to force the adapter open. Then, insert
your finger in the hole on the underside of the
adapter as shown in the illustration at left, and pushPLAYBACK
Sliding latchup and remove the cassette.
Compact video cassette
NOTES:
cDuring tape loading and unloading, do not touch the
reels for safety and tape protection.
cDuring special-effect playback (slow motion, still frame,
Reels
etc.), the picture may vibrate or noise bars may appear
on the screen.
cTo record on a VCR using a compact cassette and the
adapter, cover the adapterOs recording safety hole with
adhesive tape.
Recording safety hole |
ACEC
JVC
