13. OTHERS13. OTHERS
13-2 Troubleshooting13-3 Hour Meter Display
The GY-DV5000 can display the accumulated running time of the head drum in the HOUR METER item on the OTHERS (2/2) menu
SymptomsRemedy
screen. Use this as a guide for periodical maintenance. See page 7.
Power cannot be switched ON.I Is power supply connected correctly?
I Is battery pack recharged?
I Was the power turned ON immediately after being turned OFF?1.Set the POWER switch to ON.
Wait at least 5 seconds before turning the power ON again once it has been
turned OFF.2.Press the STATUS button for 1 second or longer to display
OPENthe TOP MENU screen.EDITSEARCHMONITOR
Recording is not possible.I Is the switch on cassette set to OREC�? If it is set to OSAVE�, set it to OREC�.2.3.45600K5600K5600K//181641FILTER3200KNDND
I The Camera mode has not been selected. (The CAM indicator does not light.)SHUTTERSTATUSMENUAUDIOLCDBRIGHTDISPLAY3.Rotate the SHUTTER dial to select the OTHERS item, andLEVELFRONTREARPULLOPEN
AUTO IRISFULL AUTOBLACKLOLUX
While the VTR indicator lights, press the MODE switch upward to turn on theBACK LNORMALSPOT LSTRETCHNORMALCOMPRESSMODEVTRCAMCH-1CH-2CH-1CH-1AAUUDIO INPUTDIO SELECTMANUAUTOCH-2ALCH-2then press the SHUTTER dial.
CAM indicator.I The OTHERS (1/2) menu screen appears.
ONPOWEROFFVTR
Camera image does not appear on LCDI The Camera mode has not been selected. (The CAM indicator does not light.)4.Select the NEXT PAGE item on the OTHERS (2/2) menu
monitor or in viewfinder.While the VTR indicator lights, camera image will not be output. Press thescreen, and then press the SHUTTER dial.
MODE switch upward to turn on the CAM indicator.SHUTTER dialSTATUS buttonI The OTHERS (2/2) menu screen appears.
 The accumulated drum running time is shown next to the
Image shown on LCD monitor or inI Adjust the brightness of the LCD monitor or viewfinder screen.
DRUM HOUR item on the OTHERS (2/2) menu screen.
viewfinder is dark or blurred.I Is the color temperature conversion filter knob set to 5600K+ND?
I Is the iris closed?
I Is the shutter speed too fast?TOP MENU menu screen5.To return to the normal screen, use either of the following
I Is the viewfinder cable correctly connected?methods. MENU
CAMERA OPERATION..I Press the STATUS button
Playback does not start when the playI In the Camera mode, is OSTOP� indicated as the VTR operation mode indicator? CAMERA PROCESS..or
button is pressed.When OSTBY� is indicated, press the STOP button to display OSTOP�. AUDIO/VIDEO..I Return to the TOP MENU screen and then select the EXIT LCD/VF..
TC/UB/CLOCK..item from the TOP MENU screen before pressing the
DV signal cannot be input.I The VTR mode has not been selected. (The VTR indicator does not light.) OTHERS..SHUTTER dial.
While the CAM indicator lights, press the MODE switch upward to turn on the FILE MANAGE..
VTR indicator. MENU ALL RESET CANCEL
EXIT
Noise interferes with playback video.I Video head may be clogged with dirt. Clean head with the special head cleaning
tape. ( See OPrecautions for Use of Head Cleaning Tape� on page 8.)
OTHERS (2/2) menu screen
Sound is not output during playback.I Is the AUDIO SELECT item on the AUDIO/VIDEO menu screen set to CH3/4.
To output the sound of the recording, set to CH1/2. OTHERS(2/2)
ALARM VR LEVEL HIGH
BATTERY TYPE 12V
Noise appears when playing back a tapeI When a tape recorded on another unit is played back or used for recording, this FRONT TALLY BLINK
recorded on another unit.phenomenon may occur due to tracking errors. BACK TALLY OFF
PAGE BACK
The transient section between scenes
recorded on other units and those DRUM HOUR 00200
recorded on the GY-DV5000 may appear
disturbed.
The front sectionOs audio level controlI Is the CH1 FRONT VR item on the AUDIO/VIDEO menu screen set to
doesnOt work.ODISABLE�? If so, set to OENABLE�.Accumulated drum running time
The front sectionOs audio level controlI The front sectionOs audio level control cannot be used to change the audio level
doesnOt change the audio level of theof the sound input to CH2. Use the side sectionOs CH2 audio level control for this
sound input to CH2.purpose.
Remaining battery power display isI The OTHERS (2/2) menu screenOs BATTERY TYPE item may not be set
incorrect.correctly in accordance with the type of battery in use. If the menu item setting is
incorrect, set it correctly using the OTHERS (2/2) menu screenOs item BATTERY
Battery alarm is displayed and the GY-TYPE.
DV5000 enters the non-operating modeI Is the battery old?
even when a fully charged battery is used.
Cassette cannot be ejected after theI The capacity of the power supply may be insufficient. Check the power voltage.
power is turned ON.
Time code or userOs bits data notI Is the TC/UB item on the LCD/VF menu screen set to OFF? If so, set to ON.
displayed.
The date and time are not displayed orI Is the DISPLAY item on the TIME/DATE menu screen set to OFF? Set to ON
recorded.when the data should be displayed and recorded.
To record the data, set the DATE REC item as well.
I Is the date and time setting made?
See OSetting, Displaying and Recording the Date and Time� on page 41~43.
9091 |
ACEC
JVC
