REMOTE INFO
PROGRAMMING THE REMOTECABLE BOX
If you?re using Zenith products, the remote is alreadyThis remote can control the cable/converter box volume
programmed for most common codes: TV = 101, VCR =and muting (instead of the TV?s) if available on your
201, CABLE = 353, and AUX = 401. For other brands, orequipment.
if your remote fails to control your Zenith products, you?ll1. Program the cable/converter box normally.
have to program the remote.
2. After programming the cable/converter box, Press and
After installing the batteries, follow these steps for each
product:hold PRG again using a blunt pointed object. Release
PRG after the indicator light turns on.
1. Press and hold PRG using a blunt pointed object.3. Press and release the device button the cable box is
Release PRG after the indicator light turns on.assigned to.
2. Press the device button to be programmed (CATV,4. This time, enter the special code 3-9-9 instead of
the product code.
VCR, AUX, or TV).
5. Press and release ENTER to save.
3. Enter the 3-digit product code from chart on next
page.
VOLUME OVERRIDE
4. Press and release ENTER to save the code.
5. Point the remote at product and press POWER to testThese remotes can override TV, VCR, or Video Disk Player
volume functions with an amplifier?s volume and mut-
the product?s operation. If it does not turn on,ing.
reprogram remote using a different code.
1. Program the amplifier normally.
6. Write the codes on the label inside the battery
compartment for future reference.2. After programming the amplifier, Press and hold PRG
again using a blunt pointed object. Release PRG after
AUTO FINDthe indicator light turns on.
If none of the codes in the code table operate your3. Press and release the device button whose volume
equipment, use Auto Find to search for the proper code.control is to be replaced by the amplifier volume
control. For example, pressing TV will operate the
1. Turn on the product you want to operate.amplifier?s volume while the remote is in TV mode.
2. Press and hold PRG using a blunt pointed object.4. This time, enter the special code 4-9-9 instead of
Release PRG after the indicator light turns on.the product code.
3. Press the key to be programmed (CATV, VCR, AUX, or5. Press and release ENTER to save.
TV).
4. Enter ?000?, then press ENTER within two seconds.AUXILIARY CAPABILITY
Auto Find is active after the indicator light flashesThis remote can control up to seven devices. If the re-
and remains lit.
mote has been programmed for four components using
5. Point the remote at the product.the TV, VCR, CABLE, and AUX keys, you may also program
6. Press and release POWER repeatedly, about once ait for up to three additional using AUX+1, AUX+2, and
second, until your product turns off. The indicatorAUX+3.
light turns off when you press POWER and on when
you release it.TO PROGRAM AUX+1, AUX+2, AND AUX+3
1. Locate three-digit code for product in code table.
7. Press ENTER immediately to save the code. The
indicator light flashes to indicate the code has been2. Press and hold PRG until indicator lights up.
saved.
8. Press POWER to turn On your product.3. Press the AUX and 1 simultaneously to select AUX+1.
9. Test your product. If the remote fails to operate some4. Enter the three-digit code and press ENTER. The indi-
of the basic functions, use Auto Find again to searchcator light should flash and then turn off to indicate
the code has been accepted. If the light stays on,
for a better code. (Auto Find resumes its search after
the last code that was entered and saved in step 7).repeat steps 3 and 4 or try a different code.
NOTE: If the indicator light stays on as you press5. Repeat steps 2-4 for AUX+2 and AUX+3.
POWER, Auto Find has tried all of the codes. If6. Write the codes on the label inside battery compart-
the product you want to control has not turnedment for future reference. Hold down AUX and press
off, your remote will not work with that product.
1, 2, or 3 to access AUX+1, +2, or +3 mode.
To cancel Auto Find, press PRG at any time during
Auto Find.
SR23 - 923-035091-7CS - REMOTES |
ACEC
OTHERS
