8EnglisH
Duration of the for persons with very for persons with for persons with less
tanning session in sensitive skinnormal sensitive skinsensitive skin
minutes
2nd session10-1520-2530-40
3rd session10-1520-2530-40
4th session10-1520-2530-40
5th session10-1520-2530-40
6th session10-1520-2530-40
7th session10-1520-2530-40
8th session10-1520-2530-40
9th session10-1520-2530-40
10th session10-1520-2530-40
using the appliance
1 Place the appliance on a solid, at and stable surface.
, The appliance can be placed in two positions: upright and tilted. (Fig. 1)
Put the plug in the wall socket.
Consult the table in these instructions for use to determine the appropriate duration of the
session.
4 Put on the protective goggles supplied.
5 Set the timer to the appropriate tanning time. (Fig. )
6 Position yourself in front of the face tanner.
, The distance between your face and the tanning lamps should be 10 cm. (Fig. )
When the set time has elapsed, the timer will automatically switch off the appliance.
Always unplug the appliance after use.
8 Keep track of the overall number of sessions you have had on a piece of paper or by means
of the memory knobs (type HB15 only).
protective goggles
The protective goggles should only be used when tanning with a Philips tanning appliance. They
should not be used for other purposes.
The protective goggles comply with protection class II according to directive 89/686/EEC.
cleaning
Always unplug the appliance and let it cool down before cleaning it.
, You can clean the outside of the appliance with a damp cloth. Make sure that no water runs
into the appliance.
Never use scouring pads and abrasive liquids such as scouring agents, petrol or acetone to clean
the appliance.
1 Clean the protective goggles with a moist cloth. |
ACEC
PHILIPS
