ENGLISH17
Troubleshooting guide
If the Combi solarium should not operate as required, this may be due
to a defect. In this case do not hesitate to apply to your dealer or to a
Philips Customer Care Centre.
However, it is also possible that the appliance has not been installed
according to the instructions or is used incorrectly.
If this is the case, you will be able to solve the problem immediately.
You may check the following section before contacting your dealer or a
Philips Customer Care Centre.
ProblemPossible cause
Combi solarium does not switch on.Mains plug is not in wall socket.
No mains power. (Please check with other appliance.)
Timer has not been set.
The lamp of the facial tanner (HB558 only) is still too warm to restart.Allow
the lamp to cool down for approx. 3 minutes.
The power fuse switches the mainsCheck the fuse to which the solarium has been connected.
power off when switching on or whileThe proper type for your solarium is a 13 A (for U.K.) or a 10 or 16 A (for
using the solarium.other countries) normal fuse or a slow reacting automatic fuse.
The browning is not according to yourYou use an extension cord which is too long, wound-up and/or does not
expectations.allow the required power levels. Please apply to your dealer. In general, we
advise not to use an extension cord.
You followed a course which is not the most appropriate for your skin type.
The operational distance is larger than indicated.
After using for a long time the UV production of the lamps decreases. (With
normal use this will not be noticeable for years.)
You may compensate for this effect by selecting longer treatment times or
replace the sun lamps |
ACEC
PHILIPS
