SECTION 4
SERVICE MODE
[Liquid Crystal Display All Lit Check Mode][CD Aging Mode]
This mode can be used for operation check of CD section.
Procedure:
1. Set to standby state.Procedure:
2. Press three buttons ofx (TAPE),x (CD), and MD/VIDEO1. Load a CD disc.
simultaneously.2. Set to standby state.
3. Liquid crystal display are all turned on.3. Press three buttons ofx (TAPE),x (CD), and TUNER
4. To exit from this mode, press the?/1 button to turn the powersimultaneously.
OFF.4. The aging is executed in bellow sequence.
5. To exit from the aging mode?/1, prbutton to turess then the
[Tape Deck Aging Mode]power OFF.
This mode can be used for operation check of tape deck section.
Aging mode sequence:
Procedure:
1. Set a tape in the tape deck.Start
2. Set to standby state.
3. Press three buttons ofx (TAPE),x (CD), and TAPE
simultaneously.
4. The aging is executed in bellow sequence.Open the disc tray
5. To exit from the aging mode, press the?/1 button to turn the
power OFF.
Close the disc trayAging mode sequence:
Start
Play the last track
Shut off
FWD Play
1 minute
REC pause for 3 seconds
Shut off
FWD REC
3 minutes
Fast forward
Shut off
REV Play
1 minute
REC pause for 3 seconds
Shut off
REV REC
3 minutes
Rewind
11 |