61833037.fm Page 7 Wednesday, November 2, 2005 11:40 AM
PRODUCT SHEET
CONTROL PANEL
A. Light switch.
B. Speed selector switch.
With light and speed selected, the hood switches on when the
steam deflector is opened, and switches off when it is closed.
Medium amount of Large amount of
steam and fumessteam and fumes
Small amount of steam
and fumes
FIG. 3
FIG. 4
1. Control panel.
2. Grease filters or grille.
3. Lighting unit/s.
4. Pull-out steam deflector.
5. Filter or grille release devices.
Removing and replacing or washing the grease
filter:
1. Unplug the appliance or disconnect the power supply.
2. Pull out the steam deflector (1 - Fig. 1).
3. Open the grille or grease filters (2,3 - Fig. 1).
4. For hood version with grille: Remove the device securing the
grease filter (Fig. 5).
5. Remove the dirty grease filter.
6. After replacing or cleaning the grease filter (depending on model) FIG. 5
carry out in reverse order to refit, making sure it covers the entire
extraction surface.
Fitting or replacing the carbon filter:
1. Unplug the appliance or disconnect the power supply.
2. Pull out the steam deflector (1 - Fig. 1).
3. Open the grille or grease filters (2,3 - Fig. 1).
4. If the filters are not fitted:
Fit the carbon filter over the motor-rotor protection grille and
turn clockwise until locked (Fig. 6).
5. If the carbon filter is already fitted and needs replacing, turn the
carbon filter anticlockwise.
6. Refit the extractor grille or grease filters.
Replacing bulbs:
1. Unplug the appliance or disconnect the power supply.
2. Pull out the steam deflector (1 - Fig. 1).
3. Open the grille or grease filters (2,3 - Fig. 1).
4. Remove the burnt-out bulb.
5. Use 40 W max. (E14) bulbs only.
6. Refit the extractor grille.
FIG. 6
5019 618 33037
D GBFNLEPIGR |
ACEC
