PREPARING THE LAUNDRYSELECTING A DRYING TIME OR A PROGRAMME, FILTERAFTER-SALES SERVICE
AND OPTIONS
1. Check that all fastenings are closed and that Clean the lint filter at the end of every drying If, after carrying out the above checks the
pockets are empty. Drying Time or Programme and Options:cycle:malfunction persists or appears again, turn
2. Turn the articles inside out.? To select a drying time or a programme, turn 1. Open the door.the dryer off and call our After-Sales Service
3. Place laundry loosely in the drum to make the time selector knob clockwise.2. Pull the filter upwards.(refer to guarantee).
sure it doesn?t become tangled.? To select an option (if available), press the 3. Remove lint using a soft brush or your Please specify:
Sort laundry as follows:corresponding button.fingertips.? The nature of the fault.
4. Push the filter firmly back into place.
A) By care symbols ? Press the button again to cancel the option.? The dryer type and model.
(on the collar or inside seam):BUILT-IN INSTALLATION? The service code (the number after the word
STARTING AND COMPLETING A DRYING CYCLE
Service on the adhesive rating plate) on the
Suitable for tumble drying1. Having selected the desired drying time or To built in the dryerright-hand side when the door is open.
programme and options, press the Start
Tumble drying with reduced drying 1. It is recommended to not remove the work-? Your full address and phone number.
intensity onlybutton.top.
If the laundry is not removed at the end of
Do not tumble dry2. Connect the dryer to an external ventilation
the drying cycle, an automatic anti-crease system in order to prevent steam from
B) By amount and thickness/weightcycle will operate for maximum 12 min. The damaging your furniture during the years.
drum rotates at regular intervals, preventing
Whenever the load to be dried exceeds dryer
capacity, separate laundry according to the laundry from creasing.TROUBLESHOOTING GUIDE
2. On completion of the drying cycle, set the time
weight (e.g. towels from thin underwear).If a fault occurs, before contacting our After-
C) By type of fabricsselector knob to position ?0?. Sales Service, make the following checks to
The dryer indicator lamp ?On? switches off.
Cotton/linen: towels, cotton jersey, bed and try and remedy the problem:
table linen made of cotton or linen.INTERRUPTING A DRYING CYCLEDrying takes too long / laundry is not dry
Synthetics/Easy Care: blouses, shirts, overalls, enough:
etc. made of polyester or polyamide, as well as To interrupt the dryer during operation? Was the correct drying time selected?
cotton/synthetic mixes.1. Set the time selector knob to the programme
? Was the inserted laundry too wet (Washing
D) By drying level?Airing?.machine spin speed less than 800 rpm)?
? Sort into: iron dry, cupboard dry, etc.2. Wait at least 5 minutes before opening the
? Is the lint filter dirty (filter indicator lamp
Do not tumble dry: woollens, silk, nylon door to allow the dryer to cool down. on)?
stockings, delicate embroidery, fabrics with For your safety the drying time stops
automatically if you open the door.The dryer does not operate:
metallic decorations, bulky items such as
sleeping bags, etc.3. To restart, after door opening, close the ? Is the power plug properly inserted into the
door and press the Start button again. mains electricity socket?
Important: only use specific indicated dryer-
safe additives and rinse items that have been ? Is there a power failure?
treated with stain remover thoroughly in plenty ? Has the fuse blown?
of water before drying. Only use specific ? Is the door properly closed?
indicated dryer-safe plastic items and never ?Has the Start button been pressed?
dry rubber or articles contaminated with Lint filter indicator lamp on:
vegetable oil in the dryer.
? Is the lint filter clean?
? Is the vent hose blocked?
5019 307 00316 |
ACEC
