SOUND
CUSTOM AUDIO ADJUSTMENTDSP SURROUND
MASTER VOLUMEMULTI JOG
BALANCEMUTINGDSP
DSP
TONE
JOG JOG
-,+-,+
VOLUME
MULTI JOGBASS +,-
BALANCE
TREBLE
MUTING
The DSP (Digital Signal Processor) surround circuits can recreate
VOLUME CONTROLthe effect of sounds reflected from walls or ceilings, to obtain the
Turn MASTER VOLUME (press VOLUME +,-).sound presence of real environments. The unit provides 10 DSP
preset modes.
Adjust from 0 (minimum) to 49 and MAX (maximum).
Volume level setting is retained during power-off standby1 . If the unitPress DSP.
is turned off with the volume set to 21 or higher, it is automatically
turned down to 20 the next time the unit is turned on.2W ithin 6 seconds, turn MULTI JOG to select the
desired DSP mode.
Left and right balance of the front and surround speakersThe "
" and "" (surround speakers) indicators light up.
(except in 5.1ch IN function)DISCO 1DISCO 2HALL 1HALL 2LIVE 1
1 Press BALANCE repeatedly.
" " and " *" appear alternately.MOVIE 2MOVIE 1CHURCH 2CHURCH 1LIVE 2
" " means that the left and right front speakers level is
the same.When the music source is monaural
" *" means that the left and right surround speakersThe DSP system may not work effectively depending on the
level is the same.
selected DSP mode.
Select one of them to adjust it.
*This is not displayed in stereo mode (SURROUND off or
DSP off) or when the surround speakers are set to " ".To cancel the selected mode
2Turn MULTI JOG (press JOG +,- repeatedly).Press DSP to display the DSP mode name, and press the button
again within 6 seconds. "
" appears on the display.
Example:
" " means that the left front speaker level is 5 dB higher
than that of the right front speaker.To select with the remote control
1 Press DSP.
" " means that the right surround speaker level is
10 dB higher than that of the left surround speaker2W.ithin 6 seconds, press JOG + or - repeatedly until the
desired DSP mode is displayed.
NOTE
YThe adjustable level ranges from 0 to 10 dB.NOTE
YThe surround speaker balance can be adjusted only whenYDSP cannot be turned on when the surround speakers are set
SURROUND or DSP is set to on and the surround speakersto " ".
are not set to " ".YDSP is automatically cancelled when SURROUND is turned
on, and vice versa.
Muting the sound temporarilyYDSP is automatically cancelled and cannot be turned on:
Press MUTING so that "- " appears on the display. The�When the 5.1ch IN function is selected.
sound is muted.�When the source direct function is activated.
To return to the previous volume level, press MUTING again.�When the front speaker system B is turned on.
"- " is displayed.�When the input signal is 96 kHz.
To reset the volume and balance to the default value, press and
hold BALANCE until " " is displayed.
All the speaker volume as well as the left and right balance ofSOUND ADJUSTMENT DURING
the front and surround speakers are reset to the default valueRECORDING
(0 dB).
The output volume and tone of the speakers or headphones may
BASS AND TREBLE (except in 5.1ch INbe freely varied without affecting the level of the recording.
function)
Turn BASS or TREBLE.
The adjustable level for the bass sound and the treble sound
ranges from �10 to +10 dB at 2 dB steps.
Adjusting bass and treble with the remote control
1 Press TONE repeatedly to select BASS or TREBLE.
2 Press JOG + or - to adjust the bass or treble level.
10 ENGLISH |
ACEC
