IC DESCRIPTION-1/3 (LA9241ML)-1/2
Pin No.Pin NameI/ODescription
Pin to which external pickup photo diode is connected. RF signal is created by adding with the
1FIN2IFIN1 pin signal. FE signal is created by subtracting from the FIN1 pin signal.
2FIN1IPin to which external pickup photo diode is connected.
Pin to which external pickup photo diode is connected. TE signal is created by subtracting from
3EIthe F pin signal.
4FIPin to which external pickup photo diode is connected.
5TBIDC component of the TE signal is input.
6TE-IPin to which external resistor setting the TE signal gain is connected between the TE pin.
7TEOTE signal output pin.
8TESIITES OTrack Error Sense� comparator input pin. TE signal is passed through a band-pass filter
then input.
9SCIIShock detection signal input pin.
10THITracking gain time constant setting pin.
11TAOTA amplifier output pin.
Pin to which external tracking phase compensation constants are connected between the TD and
12TD-IVR pins.
13TDITracking phase compensation setting pin.
14JPITracking jump signal (kick pulse) amplitude setting pin.
15TOOTracking control signal output pin.
16FDOFocusing control signal output pin.
17FD-IPin to which external focusing phase compensation constants are connected between the FD and
FA pins.
18FAIPin to which external focusing phase compensation constants are connected between the FD- and
FA- pins.
19FA-IPin to which external focusing phase compensation constants are connected between the FA and
FE pins.
20FEOFE signal output pin.
21FE-IPin to which external FE signal gain setting resistor is connected between the FE pin.
22AGNDNAnalog signal GND.
23SPOSignal ended output of the CV+and CV- pin input signal.
24SPIISpndle amp input.
25SPGIPin to which external spindle gain setting resistor in 12 cm mode is connected. (Not connected)
Pin to which external spindle phase compensation constants are connected together with SPD
26SP-Ipin.
27SPDOSpindle control signal output pin.
28SLEQIPin to which external sled phase compensation constants are connected.
29SLDOSled control signal output pin.
30, 31SL-, SL+ISled advance signal input pin from microprocessor.
32, 33JP-, JP+ITracking jump signal input pin from DSP.
34TGLITracking gain control signal input from DSP. Low gain when TGL = H.
35TOFFITracking off control signal input pin from DSP. Off when TOFF = H.
-26- |