INSTRUMENT DISASSEMBLY
INSTRUMENT DISASSEMBLY
1. DECK DISASSEMBLY
B. PANEL FRONT DISASSEMBLY
Perform all disassembly procedures in the order presented.
When reassembling, use the reverse procedure.
Make sure that all leads/ wiring are routed correctly when reassembling.
@ Remove 2 Hooks at left and right sides,
Simultaneously, remove panel.
A. TOP COVER REMOVAL
@ Remove a screws
! Remove 3
Hooks at
bottom
FIG.2
! Remove three screws# Remove a screws
C. LOGIC PCB DISASSEMBLY
FIG. 1
Remove 2
screws, then
remove Logic
FIG.3
3839 |
ACEC
