ALIGNMENT INSTRUCTIONS
Table-B
DATA
MODEADJUSTMENT ITEMSREMARKS
INITIAL RANGE
S2Screen Adjustment--
Auto RF AGC--
Video Level (VIDEOL)70 ~ 7 Must be set to 7
RF AGC Delay (RFAGCD)*0 ~ 63Align RF AGC threshold
S5FM Level (FM.LEV)80 ~ 31Must be set to 20
AGC Point3.75-Select AGC reference voltage
A/D VALUE--
Horizontal Phase(H.PHASE)*0 ~ 31Align sync to flyback pulse, using internal cross pattern(S7)
Vertical Position (V.POSI)*0 ~ 63Align vertical DC bias, using internal cross pattern(S7)
Vertical Size (V.SIZE)*0 ~ 127Align vertical amplitude, using internal cross pattern(S7)
S6
NO SD POWER OFFYES-Automatically turn off in 15min for no received signal.
Vertical S-Correction (V SC)00 ~ 31Must be set to 6
Vertical Linearity (V LIN)200 ~ 31Must be set to 16
Internal Black --Display internal BLACK pattern
Internal 100% White--Display internal 100% WHITE
S7
Internal 60% White--Display internal 60% WHITE
Internal Cross Pattern--Display internal CROSS pattern
Red Drive (RD)*0 ~ 127Align RED OUT AC level
Green Drive (GD)100 ~ 15Must be set to 10
Blue Drive (BD)*0 ~ 127Align BLUE OUT AC level
S8
Red Bias (RB)*0 ~ 255Align RED OUT DC level
Green Bias (GB)*0 ~ 255Align GREEN OUT DC level
Blue Bias (BB)*0 ~ 255Align BLUE OUT DC level
Subbrightness*0 ~ 127Align common RGB DC level
Contrast100 ~ 27
S9
Tint270 ~ 27
Color150 ~ 27
S12Forwarding Mode-Factory Initialization
* indicates the items with different settings each of sets
2. ASSEMBLY ADJUSTMENTS
1) SCREEN ADJUSTMENT (S2)
? Enter the service mode and select service adjustment S2.
? You can see the one horizontal line on the screen.
? Adjust the Screen Control Volume (located on FBT) so that the horizontal line onscreen may be
disappeared.
? Press the volume up or down button to exit in the screen adjustment mode.
NOTE
IN THE SCREEN ADJUSTMENT MODE, DONT PRESS OTHER BUTTONS EXCEPT VOLUME UP OR DOWN BUTTON.
7 |
ACEC
