ALIGNMENT INSTRUCTIONS
4-1. Horizontal Position Adjustment
Y Select H-CENTER item, adjust H-CENTER data value to obtain proper horizontal centering of theinternal cross
pattern at the left and right of the screen.
4-2. Vertical Position Adjustment
Y Select V-CENTER item, adjust V-CENTER data value to center the raster properly on the screen.
4-3. Vertical Size Adjustment
Y Select OV.SIZE� item, adjust OV.SIZE� data value to proper vertical size as follows.
5) WHITE BALANCE ADJUSTMENT(S8)
Y Receive a good local channel.
Y Enter the service mode and select service adjustment S8.
Y You can see the OSD as shown in below.
GD61
BD74
RB127
GB160
BB138
MOVE ADJUST RECALL : SET
Y Using volume up or volume down, adjust service adjustment data of RD/GD/BD and RB/GB/BB until a good gray
scale with normal whites is obtained.ALIGNMENT INSTRUCTIONS
Y Press the DISPLAY button to memorize the data.
8 |
ACEC
