AV14BJ8ENS / AV14BM8ENS
AV14BJ8EPS / AV14BM8EPS
AV14BJ8EES / AV14BM8EES
MEMORY IC REPLACEMENT
1. Memory IC
SERVICE MENU
This model use a memory IC.
This memory IC stores data for proper operation of the video
and deflection circuits.
When replacing, be sure to use an IC containing this (initial
value) data.
2. Memory IC replacement procedure
(1) Power off
Switch off the power and disconnect the power cord from
the wall outlet.
Fig.1
(2) Replace the memory IC
SERVICE MENU SELECT KEY
Initial value must be entered into the new IC.
(3) Power on
Connect the power cord to the wall outlet and switch on the
power.
POWER
(4) SERVICE MENU setting
1) Press MENU key and, while the displayed MENU
screen, press 4, 7, 2, 5 key on the remote control unit.NUMBER
2) The SERVICE MENU screen of Fig.1 is displayed.
3) Verify what to set in the SERVICE MENU, and set
whatever is necessary (Fig.1). Refer to the SERVICEITEM
SELECT(2)
ADJUSTMENT for setting.
FUNCTION
4) Press the MENU key to exit SERVICE MENU.
MENU
VALUE
(5) Receive channel settingSELECT(
)
VALUE
Refer to the OPERATING INSTRUCTIONS (USER?SSELECT( )
GUIDE) and set the receive channels (Channels Preset) as
ITEM
described.SELECT(1)
(6) User settings
Check the user setting items according to after page.
Where these do not agree, refer to the OPERATING
INSTRUCTIONS (USER?S GUIDE) and set the items as
described.
Fig.2
No. 51999 11 |
ACEC
