AV-28X37SUE AV-28X37HKE
AV-28X35HKE AV-28X37HIE
AV-28H35SUE AV-28H35BUE
AV-28X35HUE
3.5.2 FOCUS ADJUSTMENT
Measuring
ItemTest pointAdjustment partDescription
instrument
FOCUSSignalFOCUS VR(1) Receive a cross-hatch signal.
adjustmentgenerator[In HVT](2) Select the FULL mode.
(3) While watching the screen, adjust the FOCUS VR to
make the vertical and horizontal lines as fine and
sharp as possible.
(4) Make sure that when the screen is darkened, the
lines remain in good focus.
HVT
FOCUS
SCREEN
3.5.3 VSM PRESET ADJUST SETTING
Measuring
ItemTest pointAdjustment partDescription
instrument
VSM PRESETRemote [5.VSM PRESET](1) Select STD(standard) of PICTURE MODE with the
settingcontrol unit(BRIGHT/SOFT/STD)[MENU] key.
1. CONT.(2) Select 5.VSM PRESET.
2. BRIGHT(3) Adjust the FUNCTION UP/DOWN and -/+ key to
3. SHARPbring the set values of 1.CONT to 5. HUE to the
4. COLOURvalues shown in the table.
5. HUE(4) Press the [MENU] key and memorize the set value.
(COOL/WARM/(5) Respectively select BRIGHT or SOFT of PICTURE
NOMAL)MODE, and make similar adjustment as in 3 above.
1. WDR R(6) Press the [MENU] key and memorize the set value.
2. WDR G(7) Select COOL of COLOUR TEMP with the [MENU]
3. WDR Bkey.
(8) Select 5.VSM PRESET.
(9) Adjust the FUNCTION UP/DOWN and -/+ key to
bring the set values of 1.WDR R to 3. WDR B to theVSM PRESET setting item
1.CONT. 2.BRIGHT 3.SHARP 4.COLOUR 5.HUEvalues shown in the table.
(10) Press the [MENU] key and memorize the set value.
BRIGHT+70000(11) Respectively select NORMAL or WARM of
PICTURE MODE, and make similar adjustment as in
SOFT-30-2009 above.
(12) Press the [MENU] key and memorize the set value.
STANDARD00000
* Refer to OPERATING INSTRUCTIONS for the
1.WDR R 2.WDR G 3.WDR BPICTURE MODE.
COOL-15-90
WARM+400
NOMAL000
1-20 (No.52106) |