AV-N29703
Measuring
ItemTest pointAdjustment partDescription
instrument
WHITESignalS14:R DRIVE1. Receive the black-and-white signal ( color off ).
BALANCEgeneratorS15:B DRIVE2. Enter to the SERVICE MENU mode.
(High Light)
3. Select the HIGH LIGHT mode in the SERVICE MENU.
adjustmentRemote
control unit4. Set the initial setting value of S14:R DRIVE and S15:B DRIVE
with the cccc, eeee, ffffand hhhh keys of the remote control unit.
5. Adjust the screen until it becomes white using the cccc, eeee, ffff
and hhhh keys of the remote control unit.
(NOTE)
The bbbb EXIT key is the cancel key for the WHITE BALANCE.
******
Initial
Variable
[WHITE SCREEN]No.Setting itemsetting
range
value
S14R DRIVE0^12764
REMOTE CONTROL UNITS15B DRIVE0^12764
H.LINE ONH.LINE OFFEXIT
123
R DRIVEB DRIVE
456
R DRIVEB DRIVE
789
SUB BRIGHTRemoteS01:BRIGHT1. Receive the broadcast and set the STANDARD mode.
adjustmentcontrol unit
2. Enter the SERVICE MENU.
3. S elect S01:BRIGHT of the V/C(S) mode.
4. Set the initial setting value of the S01:BRIGHT with the
FUNCTION / key.
5. If the brightness is not the best with the initial setting value,
make fine adjustment of the S01:BRIGHT until you get the
Initial
Variableoptimum brightness.
No.Setting itemsetting
range
value
S01BRIGHT0^12764
SUBRemoteS02:PICTURE1. Receive the broadcast and set the STANDARD mode.
CONTRASTcontrol unit
2. Enter the SERVICE MENU.
adjustment
3. Select S02:PICTURE of the V/C(S) mode.
4. Set the initial setting value of the S02:PICTURE with the
FUNCTION / key.
5. If the contrast is not the best with the initial setting value, make
No.Setting itemVariableInitialfine adjustment of the S02:PICTURE until you get the optimum
rangesetting
contrast.
value
S02PICTURE0^12760
No.52058 25 |