AV-14FM
Measuring
ItemTest pointAdjustment partDescription
instrument
AdjustmentSignal1. CUT OFF (R)1. Receive a black and white signal (colour off).
generator
of WHITECUT OFF (G)2. From the SERVICE MENU, select 2. V/C to display 1. CUT OFF
BALANCECUT OFF (B)(R), (G) and (B) .
Remote
(Low light)control unit3. Set each value to initial setting value with 4^9 keys of the
SCREEN VRremote control unit.
[IN HVT]4. Press the 1 key of the remote control unit to show the single
horizontal line on screen.
5. Turn the SCREEN VR fully counter-clockwise, then slowly turn it
clockwise to where one of a red, blue or green colour is faintly
visible.
V/C PAL6. Use keys 4^9 of the remote control unit and adjust the other 2
1. CUTOFF(R) * **colours which except the appeared colour to where the single
(G) * **horizontal line appears white.
(B) * **
7. Turn the SCREEN VR to where the single horizontal line glows
50Hz
faintly.
/ :SELECT
8. Press the 2 key to turn off the single horizontal line.
- / + : OPERATE DISP : EXIT
9. Press the DISPLAY key twice to return to the normal screen.
VariableInitial setting
KEY ASSIGNMENT OF REMOTE CONTROL UNITAdjustment item
rangevalue
H.LINE OFF
R-128^+127-50
123
H.LINE ON1. CUT OFFG-128^+127-50
G. CUTOFF( 3 )B-128^+127-50
456
R. CUTOFF( 3 )B. CUTOFF( 3 )
R. DRIVE( 3 )B. DRIVE( 3 )
37893
R. CUTOFF( )B. CUTOFF( )
33
R. DRIVE( )B. DRIVE( )
3
G. CUTOFF( )
RGB
AdjustmentSignal2. DRIVE (R)1. Receive a black and white signal (colour off).
generator
of WHITEDRIVE (B)2. Select 2. V/C from the SERVICE MENU.
BALANCE3. Select 2. DRIVE (R) / (B) with MENU 1/2 key, and set each
Remote
(High light)control unitvalue to initial setting value with 4 and 7 or 6 and 9 keys of the
remote control unit.
4. Use the keys 4 and 7 or 6 and 9 to produce a white screen
5. Press the DISPLAY key twice to return to the nomal screen.
V/C PALVariableInitial setting
Adjustment item
rangevalue
2. DRIVE(R) * **
(B) * **R-64^+63+0
2. DRIVE
B-64^+63+0
50Hz
/ :SELECT
- / + : OPERATE DISP : EXIT
18No. 51753 |
ACEC
