3.1.4 Removing the DVD changer mechanism assembly
(See Figs.8 to 10)
? Remove the metal cover.
DVD changer mechanism assembly
(1) From the left side of the main body, disconnect the card
wires from the connectors (CN800, CN810) on the main
board. (See Fig.8.) [For DX-T9, DX-T7]
(2) From the left side of the main body, disconnect the card
wires from the connector CN800 on the main board. (See
Fig.8.) [For DX-T5]
(3) From the top side of the main body, remove the two screws
F attaching the DVD changer mechanism assembly on the
mecha chassis. (See Fig.9.)
(4) Take out the DVD changer mechanism assembly from the
main body and disconnect the card wire from the connector
CN930 on the video board. (See Fig.9.)
Reference:
When the resolution of the DVD changer mechanism assem-
bly is done sequentially, release the claws b of the tray fitting
and remove the five tray fitting from the DVD changer mecha-
nism assembly. (See Fig.10.)
FF
DVD changer mechanism assembly
CN800 CN810
Video board
CN930
Fig.9
Tray fitting
bb
Main board
Fig.8
DVD changer mechanism assembly
Fig.10
(No.MB368)1-13 |
ACEC
