3.2.3 DISASSEMBLY/ASSEMBLY OF [15] MONITOR ASSEMBLY
zCAUTION
(1) During the procedure, be careful in handling the LCD
MODULE,etc., especially not to damage or soil the mon-L15eMONITOR COVER
2ASSEMBLY
itor screen. If it is soiled with fingerprints, etc., gently
(S15a)
clean it with chamois or the cleaning cloth.1L15d
(2) Since the BACKLIGHT is soldered to the ASSEMBLY(S15a)L15f
BOARD, the BACKLIGHT should not be separated fromL15a
the ASSEMBLY BOARD except when replacing the
BACKLIGHT.L15c
3
(S15b)
zDisassembly procedure of MONITOR ASSEMBLY
L15b
(1) While removing the 4 screws (1-4) in numerical order4
(S15b)
and disengaging the 6 hooks (L15a-L15f) in alphabeticalMONITOR HINGE
ASSEMBLYb
order, remove the MONITOR COVER ASSY.BL2.5
BOARD ASSEMBLY
(2) Remove the SENSOR BOARD ASSEMBLY from the
5
MONITOR CASE.(S15a)
CN15a
(3) Remove the FPC in CN15a and CN15b in alphabetical
SD15b
order, and remove the MONITOR HINGE ASSEMBLY.CN15b
(4) Remove the FPC of LCD MODULE from 1 connectorb
CN15c.L15e
(5) Remove 1 screw (5), and remove the BL BOARD AS-SENSOR BOARD ca
CN15c
ASSEMBLY
SEMBLY together with the BACKLIGHT.SD15a
(6) Remove the SHEET (DIFF.).
(7) Remove the LCD FRAME.
BACK LIGHT
(8) Remove the LCD MODULE.
(9) Remove the SHIELD CASE.
SHEET(DIFF)
LCD FRAME
LCD MODULE
c
SHIELD CASE
L15f
a
MONITOR CASE
L15g
:0.078N.m (0.8kgf.cm)
:0.246N.m (2.5kgf.cm)
Fig.3-2-3
(No.YF005)1-13 |
ACEC
