8Referring to Fig. 2-9, remove two screws that secure the8Referring to Fig. 2-12, remove four screws that secure the
Lens Cover and remove the Lens Cover .Main Board and remove the Main Board and disconnect
one connector.
Lens Cover
Remove
two screws.Remove two screws.
Disconnect
one connector.
Main Board
Fig. 2-9
Remove two screws
8Referring to Fig. 2-10, remove one screw that secure theFig. 2-12
Main Board.
8Referring to Fig. 2-13, remove three screws that secure
Main Board
the Servo Board and remove the Servo Board.
Remove one screw.
Remove three screws.
Fig. 2-10
Servo Board
8Referring to Fig. 2-11, remove three screws that secureFig. 2-13
the Camera Unit and remove the Camera Head.
8Referring to Fig. 2-14, remove three screws that secure
Camera Headthe Communication Board and disconnect three
connectors, then remove the Communication Board.
RemoveRemove three screws.
three screws.
Fig. 2-11
Communication Board Disconnect three connectors.
Fig. 2-14
� 5 � |
ACEC
