DMR-ES15P / DMR-ES15PC
ItemFL displayKey operation
Mode nameDescription(Remote controller key)
RAM Drive Last Error RAM Drive error code display.1. Error Number is displayedPressfor 5[4] [2] in service mode.
*For details about the drive error code,seconrefds.erWhen?INFO******?isbeing
to the Service Manual for the specific RAMdisplayed, past 19 error histories
Drive.can be displayed by pressing [0] [1]
-[1] [9]
2. Time when the error has occurred
is displayed for 5 seconds.
DD: Day
hh: Hour
mm: Minute
3. Last Drive Error (1/2) is displayed
for 5 seconds.
4. Last Drive Error (2/2) is displayed
for 5 seconds.
5. Error occurring Disc type is
displayed for 5 seconds.
6. Disc Maker ID is displayed for 5
seconds.
In case that the maker cannot be
identified, display is black out.
7. Factor of Drive Error occurring is
left displayed
Delete the Last DrivDeletee the Last Drive Error information storedPress [9] [6] in service mode.
Erroron the DVD RAM-Drive.
Laser power confirmatDrivion e state is judged based on difference 1. into RAM
between laser power value at shipping andDrive in service mode. (Other
present laser power value.media are assumed to be non-
correspondence.)
2. Press [4] [4].
If DVD-RAM disc in not inserted,
[NO DISC] is displayed.
If power value study was filed,
[ERROR] is displayed.
Turn on all FL/LEDs All segments of FL and all LEDs are tAllurnedsegments are turned on. Press [5] [1] in service mode.
on.
S1 signal outputForcibly superimpose the S1 signal (approx.Press [5] [2] in service mode.
4.5V DC) on the EE chroma signal, and check
the output on the S terminal.
S2 signal outputForcibly superimpose the S2 signal (approx.Press [5] [3] in service mode.
2V DC) on the EE chroma signal, and check
the output on the S terminal.
16 |
ACEC
