DP-3510/4510/6010
DP-3520/4520/6020
DP-3530/4530/6030
4.1.7.F8 Mode: Service Adjustment
Set the machine to Service Mode and press "8" key on the Keypad.
?
Press the "START" key.
?
Select the desired code number on the Touch Panel display.
?
If you wish to select another code number, scroll the menu with the arrow buttons.
?
Select the desired function on the Touch Panel display and touch the "OK" button.
?
When the "C (CLEAR)" key is touched, the selected code input will not be accepted.
?
Press "FUNCTION" and "C (CLEAR)" keys simultaneously to exit the service mode.
F8 Mode
No.ItemRemarks
00Exposure Lamp replacementWhen replacing the exposure lamp.
Procedure:
a) Press the Start key to move the exposure lamp to
the position (approx. 250 mm from the optics
home position) where it can be replaced.
b) To return the optical system to the home position,
press the CLEAR key.*
01-05 Not Used
06Error Log Print/Viewa) Each time the arrow button is pressed, the
machine errors or paper jam codes stored in
memory are displayed, beginning with the oldest
code.
Note:
Only the 30 most recent codes are displayed.
07Error Log Cleara) Press the Reset key.
A Message "Error code can be cleared with the
Start key" is displayed on the LCD.*
b) Press the Start key.
08(Factory use only)Lock operation for Scanner Unit.
09Toner Density adjustmentAdjustment operation of Toner Density.
10Drum Charge adjustmentAdjustment operation of Drum Charge.
11-12 Not Used
13(Factory use only)Adjustment operation of Black Density sensor.
14Black Density gainAdjustment operation of Black Density sensor gain.
15QUANTUM PatternPrint out the QUANTUM Test Pattern.
16Not Used
17LSU PWM Pattern 1Print out the Test Pattern 1.
(Factory use only)
18LSU PWM Pattern 2Print out the Test Pattern 2.
(Factory use only)
105
Ver. 5.0JAN 2005 |
ACEC
